Swagelok eDTR online catalog
Click on the desired category to expand it. The link will open the brochure in a new window.
-
Fittings
-
Flange to Tube Fiting
-
Tube
- Gaugeable Tube Fittings and Adapter Fittings (MS-01-140)
- Gaugeable Alloy 2507 Super Duplex Tube Fittings (MS-01-174)
- Gaugeable Alloy 400 Mechanically Attached Pipe and Tube Fittings (MS-02-332)
- Gaugeable Chromatograph and Column End Fittings (MS-02-173)
- Heat Exchanger Tube Plugs (MS-01-93)
- High-Purity PFA Fine Thread Flare Fittings (MS-02-195)
- Assembly-by-Torque (AbT) Fittings (MS-02-466)
- Swagelok Medium- and High-Pressure Fittings and Adapters, Alloy Materials (MS-02-474)
- Medium- and High-Pressure Fittings, Tubing, Valves, and Accessories (MS-02-472)
- Dielectric Fittings (MS-02-36)
- Seal Support Data Sheet (MS-02-483)
-
- Accessories
-
- Technical
- CAD Drawings
- An Installer’s Pocket Guide for Swagelok Tube Fittings (MS-13-151)
- Swagelok Tube Fitting Instructions (NL-language)
- Installation Instructions for Female Swagelok Tube Fittings (MS-INS-FS)
- Instructions for Swagelok Medium-Pressure Tube Fittings (MS-CRD-0096)
- Plug Installation Instruction (MS-12-11)
- Installation Instructions for Swagelok Port Connectors (MS-12-12)
- Assembly Instructions Nylon/PTFE Swagelok Tube Fittings to AN Adapter (MS-CRD-NYLONAN)
- Swagelok PFA Tube Fitting Assembly Instructions (MS-12-19)
- Swagelok Dielectric Fittings instructions (MS-CRD-DIELECTRICCARD)
- Coning Tool Operating and Maintenance Instructions (MS-CRD-CONING)
- Caution Card for Adapters Reducers Port Connectors (MS-12-08)
- Fusible Fittings (MS-CRD-0107)
- Swagelok Metric Tube Fitting Card (MS-12-06)
- Tube Fitting Performance Product Test Reports PTRs and Third-Party Product Approvals and Registrations (MS-06-108)
- Instructions for Cone and Thread Fittings (MS-CRD-0224)
- Instructions for 1 inch Medium-Pressure Tube Fittings (MS-CRD-0249)
- Swagelok Tube Fitting Reassembly Instructions for Well Control Equipment Systems (MS-CRD-0275)
- PTR-393 Fire (Burn) Test with Water Quench (Reference API 607) of Stainless Steel Swagelok Tube Fittings
- PTR-1909 Gas Seal and Hydrostatic Pressure Test of Strain-Hardened 316 Stainless Steel NPT End Connections for Swagelok Medium-Pressure Fittings
- PTR-1369 Inboard Helium Leak Test of 316 Stainless Steel Swagelok Tube Fittings at Cryogenic Temperature
- PTR-1388 Outboard Helium Leak Test of 316 Stainless Steel Swagelok Tube Fittings at Cryogenic Temperature
- PTR-3223 Outboard Helium Leak Test of 316 Stainless Steel Swagelok Tube Fittings with Stainless Steel Tubing
- PTR-385 Hydrostatic Pressure Test of Swagelok Tube Fittings on Hard to Extra-Hard Tubing with Tubing Bottomed and Not Bottomed
- PTR-390 Hydrostatic Pressure Test of Swagelok Tube Fittings with 1 Turn and 3/4 Turn of Fitting Nut Assembly on Normal to Extra-Hard Tubing with Tubing Bottomed and Not Bottomed
- PTR-391 Hydrostatic Pressure Test of 316 Stainless Steel Swagelok Tube Fittings on Extra Heavy-Wall Stainless Steel Tubing
- PTR-394 Hydrostatic Pressure Test of 316 Stainless Steel Swagelok Tube Fittings with 1 Turn of Fitting Nut Assembly on Extra Heavy-Wall, Normal to Extra-Hard Tubing
- PTR-3220 Hydrostatic Pressure Test of 316 Stainless Steel Swagelok Tube Fittings with Stainless Steel Heavy-Wall Tubing
- PTR-3224 Inboard Helium Leak Test of 316 Stainless Steel Swagelok Tube Fittings with Stainless Steel Tubing
- PTR-1910 mpulse Testing of Strain-Hardened 316 Stainless Steel NPT End Connections for Swagelok Medium-Pressure Fittings
- PTR-395 Nitrogen Gas Seal Test with Repeated Reassembly of 316 Stainless Steel Swagelok Tube Fittings with Thin-Wall Stainless Steel Tubing
- PTR-3221 Nitrogen Gas Test of 316 Stainless Steel Swagelok Tube Fittings with Stainless Steel Thin-Wall Tubing
- PTR-383 Positive Pressure Helium Leak Test / Nitrogen Gas Seal Test with Repeated Reassembly of 316 Stainless Steel Swagelok Tube Fittings with Heavy-Wall Stainless Steel Tubing
- PTR-392 Steam Cycle and Thermal Shock Test of 316 Stainless Steel Swagelok Tube Fittings with Stainless Steel Tubing
- PTR-976 Summary of Vibration Test Performance Data Using a Shaker Table for 316 Stainless Steel 1/4, 1/2, 3/4, and 1 Inch Swagelok Tube Fittings With 316 Stainless Steel Tubing
- PTR-386 Thermal Cycle Test of 316 Stainless Steel Swagelok® Tube Fittings with Stainless Steel Tubing
- PTR-1235 Evaluation of Swagelok Medium-Pressure Tube Fittings with SAF 2507 Super Duplex Stainless Steel Tubing
- PTR-1967 Positive Pressure Helium Gas Leak Test with Repeated Reassembly of Stainless Steel Swagelok Medium-Pressure Tube Fittings in Excess of Rated Pressure with SAF 2507 Super Duplex Stainless Steel Tubing
- PTR-1209 Hydrostatic Pressure Test of Stainless Steel Swagelok Medium-Pressure Tube Fittings with the Fitting Nut Tightened to 75% of the Required Installation Torque
- PTR-1966 Hydrostatic Pressure Test of Stainless Steel Swagelok Medium-Pressure Tube Fittings with SAF 2507 Super Duplex Stainless Steel Tubing
- PTR-1206 Hydrostatic Pressure Test of Stainless Steel Swagelok Medium-Pressure Tube Fittings
- PTR-1207 Positive Pressure Helium Gas Leak Test with Repeated Reassembly of Stainless Steel Swagelok Medium-Pressure Tube Fittings in Excess of Rated Pressure
- PTR-1210 Hydrostatic Pressure Test of Stainless Steel Swagelok Medium-Pressure Tube Fittings with Tubing Not Bottomed
- PTR-1968 Rotary Flexure Test of 316 Stainless Steel Swagelok Medium-Pressure Tube Fittings with SAF 2507 Super Duplex Stainless Steel Tubing
- PTR-1690 Tensile Pull Test of 6 mm 316 Stainless Steel Swagelok® Medium-Pressure Tube Fittings
- PTR-1689 Thermal Cycle Test of 6 mm 316 Stainless Steel Swagelok® Medium-Pressure Tube Fittings
- PTR-2835 High-Temperature Thermal Cycling and Hydrostatic Proof Test of Super Austen
- PTR-3260 Hydrostatic Pressure Test of Super Austenitic 6Mo (6-moly) Stainless Steel Tubing With 6Mo Stainless Steel (6-moly) Swagelok Tube Fittings
- PTR-2852 Hydrostatic Pressure Test of Super Austenitic 254 SMO® (6-moly) Stainless Steel Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-2849 Hydraulic Impulse Test and Hydrostatic Proof Test of Super Austenitic 254 SMO (6-moly) Stainless Steel Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-2836 Low-Temperature Thermal Cycling and Hydrostatic Proof Test of Super Austenitic 254 SMO (6-moly) Stainless Steel Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-3263 Nitrogen Gas Seal Test with Repeated Reassembly of Super Austenitic 6Mo Stainless Steel (6-moly) Tubing with 6Mo Stainless Steel (6-moly) Swagelok Tube Fittings
- PTR-2853 Nitrogen Gas Seal Test with Repeated Reassembly of Super Austenitic 254 SMO Stainless Steel (6-moly) Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-2841 Rotary Flexure Test of Super Austenitic 254 SMO (6-moly) Stainless Steel Tubing With Stainless Steel Swagelok® Tube Fittings
- PTR-3262 Rotary Flexure Test of Super Austenitic 6Mo (6-moly) Stainless Steel Tubing With 6Mo Stainless Steel (6-moly) Swagelok Tube Fitting
- PTR-3261 Tensile Pull Test of Super Austenitic 6Mo (6-moly) Stainless Steel Tubing With 6Mo Stainless Steel (6-moly) Swagelok Tube Fittings
- PTR-2834 Tensile Pull Test of Super Austenitic 254 SMO (6-moly) Stainless Steel Tubing with Stainless Steel Swagelok® Tube Fittings
- PTR-864 Hydrostatic Pressure Test of Alloy 825 Swagelok Tube Fittings with Alloy 825 Tubing
- PTR-3266 Hydrostatic Pressure Test of Alloy 825 Swagelok Tube Fittings with Alloy 825 Tubing
- PTR-3269 Nitrogen Gas Seal Test with Repeated Reassembly of Alloy 825 Swagelok Tube Fittings with Alloy 825 Tubing
- PTR-865 Nitrogen Gas Seal Test with Repeated Reassembly of Alloy 825 Swagelok Tube Fittings with Alloy 825 Tubing at 1.25 Times the Working Pressure
- PTR-3268 Rotary Flexure Test of Alloy 825 Swagelok Tube Fittings with Alloy 825 Tubing
- PTR-866 Rotary Flexure Test of Alloy 825 Swagelok Tube Fittings with Alloy 825 Tubing
- PTR-3267 Tensile Pull Test of Alloy 825 Swagelok Tube Fittings with Alloy 825 Tubing
- PTR-867 Tensile Pull Test of Alloy 825 Swagelok Tube Fittings with Alloy 825 Tubing
- PTR-1347 Rotary Flexure Test of SAF 2507 Swagelok® Tube Fittings with 6-Moly Back Ferrules with SAF 2507 Tubing
- PTR-1434 Hydrostatic Pressure Test of Alloy 625 Swagelok Tube Fittings with Alloy 625 Tubing
- PTR-1432 Nitrogen Gas Seal Test with Repeated Reassembly of Alloy 625 Swagelok Tube Fittings with Alloy 625 Tubing at 1.25 Times the Tubing Working Pressure
- PTR-1433 Tensile Pull Test of Alloy 625 Swagelok Tube Fittings with Alloy 625 Tubing
- PTR-2089 Thermal Cycle and Thermal Soak Test of 6ELT Stainless Steel Swagelok Tube Fittings with Stainless Steel Tubing
- PTR-3216 Seismic Intensity Analysis of Laboratory Testing of Installed Stainless Steel Swagelok Tube Fittings
- PTR-3562 Nitrogen Gas Seal Test with Repeated Reassembly of Tungum Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-3563 Rotary Flexure Test of Tungum Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-3561 Low-Temperature Thermal Cycling and Hydrostatic Proof Test of Tungum Tubing with Stainless Steel Swagelok® Tube Fittings
- PTR-3558 High-Temperature Thermal Cycling and Hydrostatic Proof Test of Tungum Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-3560 Hydrostatic Pressure Test of Tungum Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-3559 Hydraulic Impulse Test and Hydrostatic Proof Test of Tungum Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-3564 Tensile Pull Test of Tungum Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-3778 Hydrostatic Pressure Test of Alloy 825 Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-3779 Low-Temperature Thermal Cycling and Hydrostatic Proof Test of Alloy 825 Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-3782 Tensile Pull Test of Alloy 825 Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-3781 Rotary Flexure Test of Alloy 825 Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-3776 High-Temperature Thermal Cycling and Hydrostatic Proof Test of Alloy 825 Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-3780 Nitrogen Gas Seal Test with Repeated Reassembly of Alloy 825 Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-4012 Hydraulic Impulse Test and Hydrostatic Proof Test of Stainless Steel Tubing with Stainless Steel Swagelok® Tube Fittings
- PTR-1726 Reassembly and Helium Leak Test of Swagelok® VCR® Metal Gasket Face Seal Fittings with Silver-Plated and Unplated Stainless Steel and Nickel Gaskets
- PTR-1192 Nitrogen Gas Seal Test with Repeated Reassembly of 316 Stainless Steel Swagelok Tube Fittings at 1.25 Times the Working Pressure
- PTR-4060 Tensile Pull Test of 316 Stainless Steel Swagelok® Tube Fittings with Stainless Steel Tubing
- PTR-3090 Hydrostatic Pressure Testing of 6MABT and 4ABT Series Stainless Steel Swagelok Assembly-by-Torque (AbT) Tube Fitting Assembled to Stainless Steel Tubing and Stainless Steel Tube Adapters
- PTR-4132 Rotary Flexure Test of 4ABT, 6ABT, 8ABT, 6MABT, 8MABT, 10MABT, and 12MABT Series Stainless Steel Swagelok Assembly-by-Torque (AbT) Tube Fitting Assembled to Stainless Steel Tubing
- PTR-4131 Hydrostatic Pressure Test of 6ABT, 8ABT, 8MABT, 10MABT, and 12MABT Series Stainless Steel Swagelok Assembly-by-Torque (AbT) Tube Fitting Assembled to Stainless Steel Tubing and Stainless Steel Port Connectors
- PTR-4133 Helium Gas Seal Test with Repeated Reassembly of 4ABT, 6ABT, 8ABT, 6MABT, 8MABT, 10MABT, and 12MABT Series Stainless Steel Swagelok Assembly-by-Torque (AbT) Tube Fitting Assembled to Stainless Steel Tubing with Alternating Torque
- PTR-4184 Chloride Stress Corrosion Cracking (CSCC) Test of 316 Stainless Steel Swagelok Tube Fittings with Stainless Steel Tubing Using 65°C Cyclic Salt Spray with Substitute Ocean Water
- PTR-4183 Chloride Stress Corrosion Cracking (CSCC) Test of 316 Stainless Steel Swagelok Tube Fitting Engineered Combinations Using 65°C Cyclic Salt Spray with Substitute Ocean Water
- PTR-5003 Thermal Cycle Test of 1 1/2 Inch 316 Stainless Steel Swagelok IPT Series Medium-Pressure Cone and Thread Fittings
- PTR-5001 Hydrostatic Pressure Test of 1 1/2 Inch 316 Stainless Steel Swagelok® IPT Series Medium Pressure Cone and Thread Fittings
- PTR-5002 Nitrogen Gas Seal Test with Repeated Reassembly of 1 1/2 Inch 316 Stainless Steel Swagelok IPT Series Medium-Pressure Cone and Thread Fittings
- PTR-5007 Chloride Stress Corrosion Cracking (CSCC) Test of 316 Stainless Steel Swagelok Tube Fittings and Eight Other Brands of 316 Stainless Steel Tube Fittings
- PTR-3777 Hydraulic Impulse Test and Hydrostatic Proof Test of Alloy 825 Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-5008 Chloride Stress Corrosion Cracking (CSCC) Test of 316 Stainless Steel Swagelok FK Medium Pressure Fittings and Another Brand of 316 Stainless Steel Medium-Pressure Fittings while Pressurized to 15 000 psig (103.4 MPa)
- PTR-5015 Positive Pressure Nitrogen Gas Leak Test with Repeated Reassembly of Alloy 2507 Swagelok Medium-Pressure Tube Fittings Assembled with Alloy 2507 Seamless Tubing
- PTR-5014 Rotary Flexure Test of Alloy 2507 Swagelok Medium-Pressure Tube Fittings
- PTR-5013 Hydrostatic Pressure Test of Alloy 2507 Swagelok Medium-Pressure Tube Fittings
- PTR-5017 Rotary Flexure Test of Stainless Steel Swagelok® Medium-Pressure Tube Fittings (FK Series) and Other Brand Medium-Pressure Cone and Thread Fittings (both with and without anti vibration glands)
- PTR-5013 Hydrostatic Pressure Test of Alloy 2507 Swagelok Medium-Pressure Tube Fittings
- PTR-5013 Hydrostatic Pressure Test of Alloy 2507 Swagelok Medium-Pressure Tube Fittings
-
Pipe
-
Vacuum
-
VCR and VCO
- VCR Metal Gasket Face Seal Fittings (MS-01-24)
- VCO O-Ring Face Seal Fittings (MS-01-28)
-
- Technical
- Swagelok VCR Fitting Installation Instructions (MS-CRD-VCR)
- Swagelok VCO Fittings Installation Instructions (MS-CRD-VCO)
- VCR Face Seal Fitting Lock and Tag Device Instructions (MS-12-27)
- VCR Split-Nut Installation Instructions (MS-CRD-0083)
- PTR-3523 Vibration and Thermal Cycle Testing of Swagelok® VCR® Metal Gasket Face Seal Fittings
-
Weld
-
Biopharm
-
Jacketed Tube Connector
-
-
Valves
-
Ball
- One-Piece Instrumentation Ball Valves, 40G Series and 40 Series (MS-02-331)
- Ball Valves, General Purpose and Special Application, 60 Series (MS-01-146)
- Fire Series Ball Valves A60T Series (MS-02-47)
- Distribution Block Valves D60 Series (MS-02-02)
- Trunnion Ball Valves, 83 Series and H83 Series (MS-01-166)
- Trunnion Ball Valves, Special Alloy Materials 83 Series (MS-02-357)
- Multipurpose Ball Valves, SK Serie (MS-02-345)
- Swagelok Alternative Fuel Service (AFS) Ball Valves (MS-02-303)
- Medium- and High-Pressure Fittings, Tubing, Valves, and Accessories (MS-02-472)
- Actuated Ball Valve Selection Guide ISO 5211-Compliant Actuator Mounting Bracket Kits (MS-02-136)
- Steam Trap Test Station With Universal Mount (MS-02-221)
- Swagelok Ball Valve Actuation Options (MS-02-343)
- Process Ball Valve Handle Options (MS-01-137)
- Process Ball Valve Vent Options (MS-02-28)
- Electric Actuators 141 and 142 Series (MS-01-35)
- General Service Ball Valves, GB Series (MS-02-484)
- Special Alloy Ball Valves 60 Series (MS-02-439)
- Cv calculator
-
- Technical
- 40 Series Optional Handles (MS-INS-40-OH)
- 40G Ball Valve Packing Adjustment (MS-INS-40G)
- 40 Series Ball Valve Packing Adjustment (MS-INS-40)
- Actuator Mounting Instructions 40G Series, 40 Series, AFS Series, and SK Series Ball Valves (MS-INS-40-ACT)
- Swagelok 40G Series and SK Series Ball Valve Locking Bracket Installation Instructions (MS-CRD-0103)
- Installation Instructions Bar Handle to 40 Series Valve (MS-INS-40BKB)
- 40 Series Nameplate Installation Instructions (MS-INS-NPK)
- Valve Packing Adjustment (MS-CRD-0112)
- Medium-Pressure Ball Valve Panel-Mount Instructions (MS-CRD-0122)
- Medium-Pressure Ball Valve Handle Positioning Instructions (MS-CRD-0121)
- 60 Series Ball Valves Mounting Instructions for 4-bolt 62 and 63 Series and 8-bolt S62 and S63 Series Valves to 140 Series Actuators (MS-INS-62-AO)
- nstructions for Mounting 60 Series Ball Valves to 131/151, 133/153, or 135/155 Pneumatic Actuators (MS-INS-60-AO)
- 60 Series 4-bolt Fastener Replacement Instructions (MS-INS-60-FAST)
- Panel Mount Instructions 4-bolt 60 Series Ball Valves (MS-INS-60PMK)
- Mounting Instructions For 3-Piece Namur Style Mounting Bracket To 2-Way 60 Series Valves (MS-INS-60-NAMUR)
- “60” Series Flange Seal Installation Instructions (MS-INS-60-2)
- “60” Series Extended Oval Handle Assembly Instructions (MS-INS-60TP)
- “60E” Series Ball Valves Components (MS-INS-60E)
- 4Flange Seal Installation Instructions For A60t Fire Serles, S60p Steam Series, And T60m Thermal Series Ball Valves (MS-INS-F60-3)
- A60 Fire / S60 Steam Series Ball Valves Panel Mount Instructions (MS-INS-S60PMK)
- Maintenance Instructions For R60 Series Ball Valves (MS-INS-R60-1)
- Maintenance Instructions For R60 Series Ball Valves (MS-INS-S60INST)
- “83” Series Ball Valve Maintenance Instructions (MS-INS-83)
- Mounting 83 Series Ball Valve to 130/150 Series Pneumatic Actuator (MS-INS-83-ACT)
- Installation Instructions 83 and H83 Series Locking Handle (MS-INS-83-LOCK)
- Electric Actuator Installation Instruction (MS-INS-ELEC-ACT)
- Solenoid Valve Installation Instructions (MS-CRD-0039)
- Integrated Test Valve Assembly Operating and Service Instructions (MS-INS-TVAUM)
- Swagelok AFS Ball Valve Panel Mount Instructions (MS-CRD-AFS-PM)
- Mounting Instructions ISO 5211 Dimensionally Compliant Bracket, Coupling, and Actuator (MS-INS-4080-NAMUR)
- Mounting Instructions ISO 5211 Dimensionally Compliant Bracket, Coupling, and Actuator to 4-Bolt 60 Series Valves (MS-INS-4B60NM)
- Medium-Pressure Ball Valve Mounting Instructions for FKB Series Medium‑Pressure Ball Valves to ISO 5211-Compliant Actuators (MS-CRD-0124)
- Medium-Pressure Ball Valve Installation Instructions for Lock-out Handle to FKB Series Medium‑Pressure Ball Valves (MS-CRD-0123)
- Medium-Pressure Ball Valve End Screw Replacement Instructions (MS-CRD-0201)
- 60 Series Stem Replacement (MS-INS-3AK)
- 60 Series Ball Replacement (MS-INS-3BK)
- Installation Instructions 43 series Latch Lock Handle Lock closed only service for straight or angle pattern valves (MS-INS-43-LLC)
- Installation Instructions 43 series Latch Lock Handle Lock open or closed service for straight or angle pattern valves (MS-INS-43-LL)
- Latch/Lock Handle for 43X and 43GX Series Ball Valves (MS-INS-43-LLX)
- Installation Instructions 43 series Latch Lock Handle (MS-INS-43LL-Z)
- Installation Instructions 44 series Latch Lock Handle (MS-INS-44LL-X.)
- Installation Instructions 45 series Latch Lock Handle Lock open or closed, or lock closed only service for straight, angle, three-way, and four-way pattern valves (MS-IN-45-LL)
- “60” Series Vinyl Sleeve Assembly Instructions (MS-INS-60-4)
- Maintenance Instructions For “60” & “60X” Series Low Dead Space Inserts (MS-INS-60-LD)
- Latch-Lock Handle Assembly Instructions for 4-Bolt, 60 Series Ball Valves (MS-INS-60LLK)
- Assembly Instructions For 8-bolt 60 Series Locking Handles (MS-INS-60-LOCK)
- Maintenance Instructions For “60M” Series Swing-out Ball Valves (MS-INS-60M)
- Welding/Brazing Instructions for 4-Bolt “60” Series Ball Valves (MS-INS-WELD-60)
- Inline Welding Card for “60” Series Ball Valves (MS-INS-F60-4)
- Instructions For No Lube, 4-bolt “60” Series Ball Valves (MS-INS-60NL)
- Panel Pount Instructions for 83 Series Ball Valves (MS-INS-83X-PM)
- “G83” Series Ball Valve Maintenance Instructions (MS-INS-G83)
- “G83” Series Installation, Maintenance, and Safe Operation Instructions(MS-INS-G83P)
- Swagelok Alternative Fuel Service (AFS) Ball Valve Service Instructions (MS-CRD-AFS)
- Warning Directional Valve (MS-INS-60-VENT)
- Chlorine Series Ball Valves (MS-INS-C60-TAG)
- Maintenance Instructions For C60v Chlorine Service Ball Valves (MS-INS-C60V)
- Maintenance Instructions for Fire Series Ball Valves (MS-INS-F60-1)
- Fire Series Ball Valve "A60t" Installation Instructions (MS-INS-F60INST)
- Maintenance Instructions For S60P Steam Series Ball Valve (MS-INS-S60-1)
- Maintenance Instructions for T60M Thermal Series Ball Valves (MS-INS-T60M)
- 60 and 60X Series 4-Bolt Ball Valves Maintenance Instructions (MS-INS-60-1)
- Swagelok SK Series Ball Valve Service Instructions (MS-CRD-0102)
- 141 Series Type DC Electric Ball Valve Actuators (MS-INS-141DC)
- Process Interface Valve Installation and Operation Instructions (MS-CRD-0234)
- 141 Series Type AC Electric Ball Valve Actuators (MS-INS-141ACO)
- 142 Series Type DC Electric Ball Valve Actuators (MS-INS-142DC)
- 142 Series Type ACE Electric Ball Valve Actuators (MS-INS-142ACEO)
- 142 Series Type DC Electric Ball Valve Actuators (MS-INS-142DCO)
- 142 Series Type AC Electric Ball Valve Actuators (MS-INS-142ACO)
- 142 Series Type ACN Electric Ball Valve Actuators (MS-INS-142ACN)
- 141 Series Type ACJ Electric Ball Valve Actuators (MS-INS-141ACJ)
- 141 Series Type DC Electric Ball Valve Actuators (MS-INS-141DCO)
- 141 Series Type ACJ Electric Ball Valve Actuators (MS-INS-141ACJO)
- 141 Series Type DCE Electric Ball Valve Actuators (MS-INS-141DCE)
- 142 Series Type ACE Electric Ball Valve Actuators (MS-INS-142ACE)
- 142 Series Type DCE Electric Ball Valve Actuators (MS-INS-142DCEO)
- 141 Series Type AC Electric Ball Valve Actuators (MS-INS-141AC)
- 141 Series Type DCE Electric Ball Valve Actuators (MS-INS-141DCEO)
- 141 Series Type ACN Electric Ball Valve Actuators (MS-INS-141ACN)
- 141 Series Type ACN Electric Ball Valve Actuators (MS-INS-141ACNO)
- 142 Series Type DCE Electric Ball Valve Actuators (MS-INS-142DCE)
- 141 Series Type AC Electric Ball Valve Actuators (MS-INS-141AC)
- “83DXL” Series Ball Valve Maintenance Instructions (MS-CRD-0266)
- PTR-5022 Hydrostatic Cycle Life Test of Swagelok® 8GB and 16GB Series General Service Ball Valves
- GB Series Ball Valve Packing Adjustment Instructions (MS-CRD-0265)
- GB Series Ball Valve Instructions for Installing Locking Handles (8GB and 16GB) and Panel Mounting (8GB only) (MS-CRD-0267)
- PTR-5024 Low Temperature Thermal Cycle Test of Swagelok® 8GB and 16GB Series General Service Ball Valves
- PTR-5023 High Temperature Thermal Cycle Test of Swagelok® 8GB and 16GB Series General Service Ball Valves
- PTR-5021 Gas Seat Test and Hydrostatic Shell Test of Swagelok® 8GB and 16GB Series General Service Ball Valves
- GB Series Ball Valve Instructions for Mounting A30/A60/A100 Series Pneumatic Actuators (MS-CRD-0268)
- PTR-5028 ASTM B117 Salt Spray Test of Swagelok® 8GB and 16GB Series General Service Ball Valves, Tested by Element Materials Technology
- Mounting Instructions for ASCO® Solenoids to ISO 5211-Compliant Actuators (MS-CRD-0264)
- Mounting Instructions for Pepperl + Fuchs Limit Switches to ISO 5211-Compliant Actuators (MS-CRD-0261)
- Mounting Instructions for Westlock Limit Switch/Position Indicator to ISO 5211-Compliant Actuators (MS-CRD-0262)
- PTR-5025 Actuation Torque Test of Swagelok® 8GB and 16GB General Service Ball Valves
- Handle Switching Instructions - W60 Series (MS-INS-W60-HDL)
- GB and 60 Series Ball Valve Standard Handle Assembly (MS-CRD-0276)
- IPT Series Ball-Seal and Soft-Seal Poppet Check Valve Service Instructions (MS-CRD-0227)
- IPT Series Dual-Seal Ball Check Valve Service Instructions (MS-CRD-0260)
- 141 Series Type ACE Electric Ball Valve Actuators (MS-INS-141ACE)
- 141 Series Type AC Electric Ball Valve Actuators (MS-INS-141ACO)
- Assembly Instructions For 8-bolt 60 Series Locking Handles (MS-INS-60-LOCK)
- PTR-5046 Actuation Cycle Test of Stainless Steel Swagelok 43G Series Ball Valve with Spring Return Handle
- Instructions for Installing Spring Return Handles on 43G Series Straight or Angle Pattern Valves (MS-CRD-0280)
- ATEX Conformant Valves Instructions for Use in a Potentially Explosive Atmosphere (MS-CRD-0120)
-
Bellow Sealed
- Bellows-Sealed Valves, BN Series (MS-01-94)
- High-Pressure, Pneumatically Actuated Bellows-Sealed Valves, HB Series (MS-01-76)
- Bellows-Sealed Valves, B Series (MS-01-22)
- Bellows-Sealed Metering Valves, BM Series (MS-01-23)
- Bellows-Sealed Valve for Switching Service BY Series (MS-02-58)
- Bellows-Sealed Valves, U Series (MS-01-38)
- Bellows-Sealed Valves, H Series (MS-01-36)
- Bellows-Sealed Valves Maintenance Kits (MS-02-66)
-
- Technical
- HB Series Bellows Valve Technical Report (MS-06-04)
- Bellows Subassembly Replacement Instructions (MS-CRD-0001)
- BM series bellows sealed metering valve (MS-CRD-0009)
- Indicator Switch Retrofit Kit (MS-CRD-0033)
- Installation Instructions Complete Bellows Valve Upperworks BN, BK Series (MS-CRD-0053)
- BN Series Bellows Valve Technical Repor (MS-06-12)
- BN Series Pneumatically Actuated Bellows Valve Bellows Subassembly Replacement Instructions (MS-CRD-0046)
- BN Series Pneumatically Actuated Bellows Valve (1 Series) Bellows Subassembly & Stem Tip Subassembly Replacement Instructions (MS-CRD-0027)
- 3 to 5 Series Pneumatic Actuators Replacement Instructions (MS-CRD-0068)
- Installation Instructions Bellows Valve Insert / Adapter Subassembly B and U Series Bellows Valves (MS-CRD-0004)
- Installation Instructions Bellows Subassemblies B and U Series (MS-CRD-0003)
- Service Instructions CBN Series Bellows Cartridge Valve (MS-CRD-0052)
- Replacement Instructions Pneumatic Actuators 4 Series to 6 Series (MS-CRD-0069)
- Installation Instructions for Gaskets and Metal O-rings in Bellows Valves (MS-CRD-0008)
- Replacement Instructions – “BN” Series Manually Actuated Bellows Sealed Valves (MS-CRD-0037)
- HB Series Pneumatically Actuated Valve Normally Closed Model Bellows Subassembly And Gasket Replacement Instructions (MS-CRD-0023)
- Visual Indicator Kit Installation Instructions For Normally Closed BN Series Valves (MS-CRD-0054)
- Assembling a Microswitch to an Actuated B Series Bellows Valve (MS-CRD-0288)
-
Check
- Check Valves C, CA, CH, CP, and CPA Series (MS-01-176)
- Lift Check Valves 50 Series (MS-01-98)
- All-Welded Check Valves CW Series (MS-02-89)
- Ultrahigh-Purity Fluoropolymer O-Ring–Free Poppet Check Valves (MS-02-320)
- Check Valves Special Alloy Materials CH Series (MS-02-440)
- Industrial Excess Flow Valves, XS Series (MS-01-110)
-
- Technical
- Installation Instructions Gaskets for “6C” and “8C” Check Valves (MS-CRD-0024)
- CA and CPA Series Check Valve Cracking Pressure Adjustment (MS-CRD-0047)
- XS Series Excess Flow Valve Technical Report (MS-06-11)
- Service Instructions CH Series Check Valve (MS-CRD-0025)
- CW Series All Welded Check Valve Welding Instructions (MS-CRD-0050)
- XS Series Excess Flow Valve Service Instructions (MS-CRD-0064)
- XS4 Series Flow Valve Spring Kit (MS-CRD-0065)
- C and CA Series Check Valves Springs, O-Rings, and Gaskets Maintenance Instructions (MS-CRD-0005)
-
Diaphragm
- Springless Diaphragm Valves for High Performance, DP Series (MS-01-165)
- High-Flow, Springless Diaphragm Valves, DF Series (MS-02-24)
- Springless Diaphragm Valves (1.125 in.) For Modular Gas Systems, DE Series (MS-02-366)
- Ultrahigh-Purity Valves for Atomic Layer Processing ALD Diaphragm and Bellows (MS-02-301)
- Diaphragm Valves, DL and DS Series (MS-01-73)
- Bellows- and Diaphragm-Sealed Multiport and Elbow Valves and Monoblock Manifolds (MS-02-442)
- Diaphragm Valves LD Series (MS-01-172)
- Ultrahigh-Purity Fluoropolymer Diaphragm Valves DRP Series (MS-02-171)
- Replaceable-Seat, Springless Diaphragm Valves DPX and DFX Replaceable-Seat Diaphragm Valves (MS-02-470)
-
- Technical
- ALD3 Diaphragm Valve Technical Report (MS-06-106)
- ALD6 Diaphragm Valve Technical Report (MS-06-22)
- DF Series Diaphragm Valve Technical Report (MS-06-14)
- DL and DS Series Diaphragm Valve Technical Report (MS-06-05)
- DP Series Diaphragm Valve Technical Report (MS-06-15)
- Swagelok® DRP Series Ultrahigh-Purity Fluoropolymer 3-Way Diaphragm Valve Technical Report Abstracts (MS-06-107)
- Swagelok® DP Series Springless Diaphragm Valve (1.125 in.) Service Instructions (MS-CRD-DPHR)
- DP Series Diaphragm Valve Directional Handle Replacement Instructions (MS-CRD-DPHR)
- ALD Diaphragm Valve with Solenoid Pilot Valve Solenoid Pilot Valve Replacement Instructions (MS-CRD-0117)
- DF Series Diaphragm Valve Service Instructions (MS-CRD-0071)
- DL/DS Series Diaphragm Valve Service Instructions (MS-CRD-0032)
- LD8 Series Diaphragm Valves Service Instructions (MS-CRD-0029)
- LD16 Series Diaphragm Valves Service Instructions (MS-CRD-0032)
- DRPTM Series Diaphragm Valve Diaphragm Replacement Instructions (MS-CRD-0088)
- DP Series Springless Diaphragm Valves (1.125 in.) Technical Report (MS-06-21)
- DE Series Springless Diaphragm Valves (1.125 in.) Technical Report (MS-06-113)
- DP Series Diaphragm Valve Installation and Maintenance Instructions (MS-CRD-0086)
- ALD3 and ALD6 Series Electronic-Actuator Position (PNP Normally Open) Sensor Installation Instructions (MS-CRD-0217)
- Springless Diaphragm Valves (1.125 in.) For High Performance (MS-02-325)
- DP and DF Series Replaceable-Seat Diaphragm Valves—Seat Replacement Instructions (MS-CRD-0223)
- ALD Optical Sensor Installation Instruction (MS-CRD-0252)
- Connecting and Setting the ALD Amplifier (MS-CRD-0251)
- ALD20 Valve Technical Report (MS-06-123)
- Instructions for Setting Electronic-Actuator Position Sensor (PNP Normally Closed) (MS-CRD-0271)
- Instructions for Setting Electronic-Actuator Position Sensor (NPN Normally Closed) (MS-CRD-0272)
- ALD3E Series Electronic-Actuator Position (PNP Normally Open) Sensor Instructions (MS-CRD-0270)
- ALD7 Diaphragm Valve Technical Report (MS-06-125)
-
Manifolds
- Instrument Manifold Systems (MS-02-445)
- Distribution Manifold, J6 Series (MS-02-214)
- Process Interface Valves DBB Valves, Process Interface Valves and Process Monoflanges (MS-02-340)
- Bellows-Sealed 3-Valve Manifolds (MS-02-07)
-
- Technical
- Swagelok® V Series, VL Series, and VB Series Manifolds with Grafoil Packing (MS-CRD-GMANIF)
- Process Interface Valves and Process Monoflanges Valve Assembly Installation Instructions (MS-CRD-0114)
- Seal and Bolt Assembly Insert Card (MS-INS-M3K-1)
- Mounting Instructions for V Series Manifolds, Universal Mounting Bracket (MS-INS-UNV-MB-V)
- Seal and Bolt Assembly Insert Card (MS-INS-V3K-1)
- PTR-3480 Fugitive Emissions and Seat Leakage Performance Type Test of Swagelok VB05 Block and Bleed Process Interface Valves Witnessed by a Third Party
- Low Pressure Header LHP Series (MS-02-480)
- VB04 Series Process Interface Valve Maintenance Instructions (MS-CRD-0241)
- VB04 Series (14 mm Bore) Process Interface Valves Extended Handle Replacement Instructions (MS-CRD-0256)
- VB04 Series Process Interface Valves Locking Handle Replacement Instructions (MS-CRD-0212)
- VB03 Series Process Interface Valve Maintenance Instructions (MS-CRD-0255)
- VB04 Series Process Interface Valve Probe Maintenance Instructions (MS-CRD-0273)
-
Needle and Metering
- Severe-Service Union-Bonnet Needle Valves, N Series and HN Series (MS-01-168)
- Severe-Service Union-Bonnet Needle Valves, Special Alloy Materials (MS-02-365)
- Integral-Bonnet Needle Valves, O, 1, 18, 20, and 26 Series (MS-01-164)
- Toggle Valves, OG, 1G, and 92 Series (MS-01-54)
- Nonrotating-Stem Needle Valves, D Series (MS-01-42)
- Rising Plug Valves, 4P and 5P Series (MS-01-49)
- Metering Valves, S, M, and 31 Series (MS-01-142)
- General Utility Service Needle Valves, GU Series (MS-02-312)
- Instrumentation Blowdown Valves, 6DB Series (MS-02-118)
- Gauge Valves (MS-01-52)
- Compact Gauge Valves For Gauge Isolation and Venting (MS-02-355)
- Forged-Body Needle Valves, 10 000 psig (689 bar) F10 Series (MS-02-215)
-
- Technical
- Repacking Instructions for Integral Bonnet Needle Valves (O, 1, 18, 20, & 26 series) (MS-INS-IB-LL)
- Replacing o-ring Seals for Integral Bonnet (O, 1, 18, 20, & 26 series) Needle Valves (MS-INS-FB-OR)
- Conversion Instructions for integral bonnet needle valves (O, 1, 18, 20, & 26 series) (MS-INS-IB-CONV)
- O-ring Replacement Instructions for the OG, 1G Valve Series (MS-INS-G)
- Installation Instructions for Toggle Valve Handle Positioner (MS-INS-TGP)
- 4P & 5P Series Seat and Stem Tip Replacement instructions (MS-INS-PDMNT)
- Repacking Instructions for the 31 Series Union Bonnet Valves (MS-INS-SB)
- D Series Maintenance Instructions (MS-INS-DK-1)
- General Utility Service Needle Valves GU Series Maintenance Instructions (MS-CRD-GU)
- M Series Metering Valves Stem Guide Ring / Packing Adjustment (MS-CRD-0018)
- Assembly Instructions – Vernier Handle Kit / S, & M Series Metering Valves (MS-CRD-0014)
- Repacking Instructions for N and HN Series Valves (MS-INS-N)
- Swagelok N Series and HN Series Severe-Service Union‑Bonnet Needle Valve Packing Adjustment (MS-CRD-0200)
- S Series Metering Valve Panel Mounting the Adjustable-Torque Handle (MS-CRD-0030)
- Maintenance Instructions For Angle Pattern Sno-Trik Series Valves (MS-INS-SNO)
- PFA Needle Valves Caution (MS-INS-PFA-C)
- Pneumatically Actuated Valves (MS-INS-90-AO)
- IPT Series Manual NV Needle Valve Service Instructions (MS-CRD-0225)
- IPT Series Manual NVT Needle Valve Service Instructions (MS-CRD-0226)
-
Quater Turn Plug
-
Relief
- Bleed Valves and Purge Valves (MS-01-62)
- Bleed Valves, Special Alloy Materials, BV Series (MS-02-356)
- Proportional Relief Valves, R Series (MS-01-141)
- Proportional Safety Relief Valves. PRV Series (MS-02-432)
-
- Technical
- Warning Card, RL3 Series Relieve Valve (MS-CRD-0038)
- R3A Series Externally Adjustable Relief Valves Maintenance Instructions (MS-CRD-0013)
- Warning Card, R3A Series Relieve Valve (MS-CRD-0028)
- Warning Card, R4 Series Relieve Valve (MS-CRD-0049)
- RL3 Series Externally Adjustable Relief Valves Maintenance Instructions (MS-CRD-0036)
- BV Series Bleed Valves, P Series Purge Valves (MS-INS-BVP)
- RL4 Series Low Pressure Relief Valve Adjustment and Seal Replacement Instructions (MS-CRD-0055)
- R4 Series Pressure Relief Valve Adjustment and Seal Replacement Instructions (MS-CRD-0048.pdf)
-
Valve Accessories
- Valve Lockout Accessory (MS-02-18)
- Solenoid Valves For Electropneumatically Actuated Bellows and Diaphragm Valves (MS-02-70)
- Indicator Switches for Pneumatically Actuated Valves (MS-02-494)
-
- Technical
- Valve Lockout Accessories for Swagelok Valves & Manifolds (MS-CRD-0056)
- Bellows and Diaphragm Valves Indicator Switch Installation (MS-CRD-0072)
- Universal Mount Installation and Strainer Element and Gasket Replacement Instructions (MS-INS-UM)
- Mounting Instructions for MAC Solenoids to Pneumatic Actuators (MS-CRD-0263)
- High Temperature Actuator Fitting Instructions (MS-CRD-0304)
-
Valve Technical
-
-
Filters
-
Grab Sample Systems
- Read about our Grab Sampling Systems
- Grab Sampling Systems Application Guide, A Swagelok Application Solutions (MS-02-479)
- GSM Geared Valve Operation and Maintenance Instructions (MS-CRD-0243)
- Swagelok Ammonia Sampler Application Guide (MS-02-491)
- Swagelok Ammonia Sampler Installation, Operation, and Maintenance Manual (MS-13-335)
- Grab Sample Valve (GSV) Assembly Instructions (MS-CRD-0281)
-
Gas Distribution Systems
-
Mechanical Seal Support Systems
-
Hoses and Flexible Tubing
- An Installer’s Pocket Guide for Swagelok Hoses (MS-13-332)
- Hose and Flexible Tubin (MS-01-180)
- Ultrahigh-Purity PFA Tubing PFA4 and PFA9D (MS-02-196)
-
- Technical
- PTR-3294 Cleanability Study of Swagelok® PTFE and PFA Crimped Hoses
- Hose Installation (MS-CRD-0116)
- PTR-2136 Hose Insulation Test of Swagelok PTFE Crimped N series Hose
- PTR-2142 Hose Insulation Test of Swagelok PTFE Crimped S series Hose
- PTR-2143 Hose Insulation Test of Swagelok PFA Crimped U series Hose
- PTR-2066 Hose Insulation Test of Swagelok® PTFE Crimped W series (SBI) Hose
- Hose Hand Swager User’s Manual (MS-13-211)
- Hose Animal Derived Ingredient (ADI) Status (MS-CRD-0233)
- PTR-4135 Steam Cycle Test of Swagelok U Series PFA Hose Assemblies
- PTR-4138 Burst Test of 2 in. Swagelok U Series Hose Assemblies
- PTR-4139 Thermal Cycle Test of Swagelok U Series Hose Assemblies
- PTR-4137 Burst Test of Swagelok 1.5 in. U Series Hose Assemblies
- PTR-4188 ISO 10380:2012 Cyclic Lifetime, Dynamic Bend Radius Testing of Swagelok FX Series Metal Flexible Hose Assemblies
- PTR-5016 Burst Testing of Swagelok PB Series Hose Assemblies
- PTR-5019 Burst Testing of Swagelok T Series Hose Assemblies
- PTR-5020 UL94 Vertical Flammability Test of Silicone Boots for Swagelok Insulated Hose Assemblies
-
Leak Detectors, Lubricants, Sealants
-
Measurement Devices
-
Flowmeters & Sensors
-
Gauges
- Pressure Gauges Industrial and Process, PGI Series (MS-02-170)
- Pressure Gauges General Purpose Gauge with ECE R110 Approval, PGN Series (MS-02-363)
- Pressure Gauges Ultrahigh-Purity and Clean Dry Air, PGU and PGC Series (MS-02-163)
- Pressure Gauges For the Sanitary Industries,PSD and PSF Series (MS-03-10)
- Pressure Gauges For Panel Builders, PBG Series (MS-02-333)
- Positionable Pressure Gauges, PPG Series, Models B, P, and S (MS-02-364)
-
- Technical
-
Smart Products
- Digital Valve Control Module VCM Series (MS-02-435)
- Intrinsically Safe Pressure and Temperature Transducers, PTX Series (MS-02-475)
- Intrinsically Safe Intelligent Control Module Commissioner Tool Manual (MS-13-331)
-
- Technical
- Valve Control Module (VCM) User’s Manual (MS-13-221)
- Pressure and Temperature Transducer (PTX) User’s Manual(MS-13-222)
- Intrinsically Safe Pressure and Temperature Transducers (PTX Series) User’s Manual (MS-13-229)
- Valve Control Module (VCM) Instructions (MS-CRD-0129)
- Remote Monitoring System Installation, Operation, and Maintenance Manual (MS-13-347)
-
Temperature
-
Transducers
- Industrial Pressure Transducers Standard Industrial (S Model) (MS-02-225)
- Industrial Pressure Transducers Product Launch Card (MS-05-65)
-
- Technical
- Industrial Pressure Transducers User’s Manual E Model (MS-CRD-PTI-E)
- Industrial Pressure Transducers User’s Manual S Model (MS-CRD-PTI-S)
- Industrial Pressure Transducers User’s Manual T Model (MS-CRD-PTI-T)
- Attachable Indicator Display for Industrial Pressure Transducers User’s Manual (MS-CRD-PTI-AI)
- Remote Panel Mount Display Model PTI-P Operating Instructions (MS-13-PTI-PM)
-
-
Miniature Modular Systems
- Modular Platform Components (MPC) Surface-Mount Components, Substrates, Manifolds, Mounting Components, and Assembly Hardware (MS-02-185)
- Modular Surface-Mount Components and Seals 9MS-02-135)
- Stream Selector System For Process Analyzer Applications, SSV Series (MS-02-326)
- Stream-Select, Switching, and Shutoff Valve Assemblies, TT2 and T2 Series (MS-02-174)
-
- Technical
-
Pre-Engineered Subsystems (PrESS)
- Field Station Module, FSM, Application Guide A Swagelok Pre-Engineered Subsystem (MS-02-359)
- Fluid Distribution Header, FDH, Application Guide A Swagelok Pre-Engineered Subsystem (MS-02-358)
- Calibration and Switching Module, CSM, Application Guide A Swagelok Pre-Engineered Subsystem (MS-02-360)
- Fast Loop Module, FLM, Application Guide A Swagelok Pre-Engineered Subsystem (MS-02-361)
- Sample Probe Module Application Guide A Swagelok Pre-Engineered Subsystem (MS-02-425)
-
Quick-Connects
- Quick Connects, QC, QF, QM, and QTM Series (MS-01-138)
-
- Technical
- Instrumentation Quick-Connects, QC Series (MS-CRD-QC1)
- QC Series Quick-Connects Service Instructions (MS-CRD-QC2)
- Full Flow Quick-Connects, QF Series (MS-CRD-QF1)
- Miniature Quick-Connects, QM Series (MS-CRD-QM1)
- QTM Series Quick-Connects Operation Instructions (MS-CRD-QTMR)
- QTM Series Quick-Connects Release Button Operation Instructions (MS-CRD-QTMB)
- QC Series Quick-Connect Design Change Identification (MS-CRD-QC3)
- QTM Series Quick-Connects Operation Instructions (MS-CRD-QTMR1)
-
Regulators
- Pressure Regulators K Series (MS-02-230)
- Pressure Regulators RHPS Series (MS-02-430)
- KCA Series Continuous Gas Delivery System (MS-18-01)
- High-Flow, Manual Gas Pressure Regulators, HF Series (MS-02-157)
- Compact, High-Flow Gas Regulators, HF Series (MS-01-156)
- Sanitary Pressure Regulators RHPS Series (MS-02-436)
- Tank Blanketing Pressure Regulators RHPS Series (MS-02-431)
- Process Regulators (MS-02-492)
- Regulator flow curve generator
- Pressure Regulator Flow Curves, Technical Bulletin (MS-06-114)
-
- Technical
- High Pressure Regulators User’s Guide (MS-CRD-0191)
- KEV Series Electrically Heated Vaporizing Pressure Reducing Regulators Instructions (MS-CRD-KEV1)
- HF Series Set-Pressure Regulator Technical Report (MS-06-93)
- HF Series Manual Regulator Technical Report (MS-06-98)
- HF Series Manual Regulator Load Spring Installation Instructions (MS-CRD-0087)
- HF Series Welding Instruction (MS-CRD-0085)
- Pressure Regulator Flow Curves Technical Bulletin (MS-06-114)
- Pressure-Reducing Regulators KPR Series Maintenance Instructions (MS-CRD-KPRMAINT)
- KBP Series Regulators Maintenance Instructions (MS-CRD-0108)
- KCB Series Regulators Maintenance Instructions (MS-CRD-0134)
- KCP Series Regulators Maintenance Instructions (MS-CRD-0109)
- KCM Regulator Installation and Operation Instructions (MS-CRD-KCM)
- KEV Series Regulators Maintenance Instructions (MS-CRD-0143)
- KHB Series Regulators Maintenance Instructions (MS-CRD-0135)
- KHF Series Regulators Maintenance Instructions (MS-CRD-0137)
- KHP Series Regulators Maintenance Instructions (MS-CRD-0140)
- KHR Series Regulators Maintenance Instructions (MS-CRD-0141)
- KFB Series Regulators Maintenance Instructions (MS-CRD-0133)
- KLF Series Regulators Maintenance Instructions (MS-CRD-0136)
- KPB Series Regulators Maintenance Instructions (MS-CRD-0132)
- KPF Series Regulators Maintenance Instructions (MS-CRD-0139)
- KPP Series Regulators Maintenance Instructions (MS-CRD-0138)
- KSV Series Regulators Maintenance Instructions (MS-CRD-0144)
- Pressure Regulators User’s Guide (MS-CRD-KREG)
- Pressure-Reducing Regulators Filter Assembly Replacement Instructions (MS-CRD-KFILTER)
- RHPS Series BD(H) 20, 25 (-DP) User Manual (MS-CRD-0151)
- RHPS Series BD(H) 6,8 User Manual (MS-CRD-0152)
- RHPS Series BD(H)10, 15 (-DP) User Manual (MS-CRD-0153)
- RHPS Series BD(H)F40 User Manual (MS-CRD-0154)
- BS(H)2 and BD2 Back-Pressure Regulator User Manual (MS-CRD-0156)
- (LP)BS(H)4/6/8 Back-Pressure Regulator User Manual (MS-CRD-0157)
- BS(H)10/15 Back-Pressure Regulator User Manual (MS-CRD-0158)
- RHPS Series CRS4,6 User Manual (MS-CRD-0160)
- RHPS Series HPRSS4, 8 User Manual (MS-CRD-0162)
- LBS4 Back-Pressure Regulator User Manual (MS-CRD-0163)
- TBRS4 Pressure-Reducing Regulator User Manual (MS-CRD-0164)
- TBRS(H)8 Pressure-Reducing Regulator User Manual (MS-CRD-0165)
- TBRS16 Pressure-Reducing Regulator User Manual(MS-CRD-0166)
- TBVS8 Back-Pressure Regulator User Manual (MS-CRD-0168)
- RHPS Series VBS8 User Manual (MS-CRD-0169)
- RHPS Series LPRD20 - 40 User Manual (MS-CRD-0170)
- LRS(H)4 Pressure-Reducing Regulator User Manual (MS-CRD-0171)
- PRS4 and PRS8 Pressure-Reducing Regulator User Manual (MS-CRD-0172)
- RHPS Series PRS(TC)12 User Manual (MS-CRD-0173)
- PRS15 Pressure-Reducing Regulator User Manual (MS-CRD-0174)
- RHPS Series PRV 2 User Manual (MS-CRD-0175)
- RHPS Series PRV 6 User Manual (MS-CRD-0176)
- RA4/6/8 Pressure-Reducing Ratio Regulator User Manual (MS-CRD-0177)
- RD(H)6/8(DP) Pressure-Reducing Regulator User Manual (MS-CRD-0179)
- RD(H)10/15 Pressure-Reducing Regulator User Manual (MS-CRD-0180)
- RHPS Series LPRD10, 15 -DP User Manual (MS-CRD-0181)
- RD(H)20/25 Pressure-Reducing Regulator User Manual (MS-CRD-0182)
- RD(H)30/40 Pressure-Reducing Regulator User Manual (MS-CRD-0183)
- RHPS Series RD(H)F40 User Manual (MS-CRD-0184)
- RS(H)2 and RD2 Pressure-Reducing Regulator User Manual (MS-CRD-0185)
- (LP)RS(H)4/6/8 Pressure-Reducing Regulator User Manual (MS-CRD-0186)
- LPRS10/15 Pressure-Reducing Regulator User Manual (MS-CRD-0187)
- RS(H)10/15/20 Pressure-Reducing Regulator User Manual (MS-CRD-0188)
- RS(H)20, 25 User Manual (MS-CRD-0189)
- RHPS Series LPRD4,6,8 -DP User Manual (MS-CRD-0192)
- PTR-1269 Oxygen Test of Swagelok KPR Series Pressure Regulators
- KCP Series Regulators Maintenance Instructions (MS-CRD-0109)
- PTR-424Lock-Up and Creep Test of Swagelok HFM Series Pressure Regulators
- KCA Series Continuous Gas Delivery System Installation and Operation Instructions (MS-CRD-0248)
- TBVS4 Back-Pressure Regulator User Manual (MS-CRD-0167)
- KCY Series Regulators Maintenance Instructions (MS-CRD-0239)
- Swagelok Process Regulators Back Pressure Regulators User Manual (MS-CRD-0289)
- Swagelok Process Regulators Pressure Reducing 1/2 in. to 1 1/2 in. User Manual (MS-CRD-0290)
- Ramp Regulator Cartridge Replacement Instructions (MS-CRD-0298)
- Swagelok Process Regulators Pressure Reducing Ramp Regulator User Manual (MS-CRD-0306)
- Swagelok Electronic Pressure Controller Hazardous Locations Safety Manual (MS-CRD-0300)
-
Sample Cylinders
-
Tubing and Accessories
-
Tubing
- Stainless Steel Seamless Tubing, Fractional, Metric, and Imperial Sizes (MS-01-181)
- Stainless Steel Titanium Alloyed Tubing Metric Sizes (MS-01-158)
- Multijacketed Tubing, Single-Jacketed Tubing, and Insulated Tubing (MS-02-188)
- Pre-Insulated Tubing Bundles Electric-Traced and Steam-Traced (MS-02-316)
- Alloy 2507 Seamless Super Duplex Tubing Fractional Sizes (MS-02-151)
- Ultrahigh-Purity (UHP) and High-Purity Stainless Steel Tubing Fractional, Metric, and Imperial Sizes (MS-01-182)
- 6-Moly Seamless Tubing (MS-02-478)
-
- Technical
-
Tools and Accessorie
- Tubing Tools and Accessories (MS-01-179)
- Tube Deburring Tool Instructions (MS-12-29)
- Five-Roll Straightener User Instructions (MS-CRD-0147)
- Tube Facing Tool, TF16, TF24, TF48 (MS-13-214)
- Tube Facing Tool, TF72 (MS-13-215)
- Tube Cutting Tool, TC72 (MS-13-216)
- Manual Coning and Threading Tool (IPT Series) User’s Manual (MS-13-224)
- Gaugeable Preswaging Tool Instruction (MS-CRD-0110)
- High Volume AbT Swaging Unit (HVSU) User’s Manual (MS-13-334)
- Multihead Hydraulic Swaging Unit (MHSU), 16FK Operating Instructions (MS-CRD-0250)
- AbT Manual Preswaging Tool Instructions (MS-CRD-0240)
- Bench Top Tube Bender User’s Manual (MS-13-145)
- Bender Repair Instructions (MS-CRD-BNDRPR)
- Electric Tube Bender User’s Manual (MS-13-138)
- Hand Tube Bender Manual (MS-13-43)
- Support System Mounting Options, Support System Assembly Instructions (MS-12-22)
- Tube Cutter Card (SR-PC-TC)
- Tube Sawing Guide Instruction Card (SR-PC-TSG)
- Plastic Tube Flaring System, FTF 1000 User’s Manual (MS-13-171)
-
Tubing Data
-
-
Welding System
- Swagelok Welding System M200 Power Supply (MS-02-342)
- Automatic ID Purge Control For the Swagelok M200 Power Supply (MS-02-367)
- Orbital Welding System, Micro Weld Heads, Series 4 and Series 8 (MS-02-130)
- Orbital Welding System, Series 5 Weld Head (MS-02-129)
- Orbital Welding System High-Performance Weld Head, Series 8HPH (MS-02-304)
- Orbital Welding System, Series 10 Weld Head (MS-02-131)
- Orbital Welding System, Series 20 Weld Head (MS-02-128)
- Orbital Welding System, Series 40 Weld Head (MS-02-140)
- Tube Cutting Tool TC72 Series (MS-02-427)
- Tube Facing Tools, TF16, TF24, TF48, and TF72 Series (MS-02-426)
- Welding Purge Panel WPP Series (MS-02-362)
-
- Technical
- M200 Power Supply User’s Manual (MS-13-212)
- M200 Calibration Unit User Instructions (MS-CRD-0198)
- M200 Automatic ID Purge Control User Instructions (MS-CRD-0148)
- Micro Series Weld Head User’s Manual (MS-13-207)
- Series 5 Weld Head User’s Manual (MS-13-203)
- Series 8HPH Weld Head User’s Manual (MS-13-170)
- Series 10 Weld Head User’s Manual (MS-13-204)
- Series 20 Weld Head User’s Manual (MS-13-205)
- Series 40 Weld Head User’s Manual (MS-13-206)
- M200 Power Supply Port Cover Installation Instructions (MS-CRD-0113)
- Quick Reference Guide Installation Procedure (MS-INS-PURGE-KIT)
- 40H Series Weld Head Electrode Extension Installation Instructions (MS-CRD-0101)
- WPP Series Welding Purge Panel Installation and Operating Instructions (MS-CRD-0145)
- Series 5, 10, and 20 Weld Head Tube Fixture Block Instructions (MS-CRD-FIXTURE)
- Mixing and Usage Instructions for SWS-FLUX-1 (MS-FLUX-INST)
- M200 TIG Torch User Instructions (MS-CRD-0149)
- Swagelok M200 Power Supply Ethernet Instructions (MS-CRD-0277)
-
Quality assurance & Dutch Swagelok product certifications
