Swagelok online catalogus
Klik op de gewenste categorie om deze uit te klappen. Via de link opent u de brochure in een nieuw venster.
-
Fittings
-
Flange to Tube Fiting
-
Tube
- Gaugeable Tube Fittings and Adapter Fittings (MS-01-140)
- Gaugeable Alloy 2507 Super Duplex Tube Fittings (MS-01-174)
- Gaugeable Alloy 400 Mechanically Attached Pipe and Tube Fittings (MS-02-332)
- Gaugeable Chromatograph and Column End Fittings (MS-02-173)
- Heat Exchanger Tube Plugs (MS-01-93)
- High-Purity PFA Fine Thread Flare Fittings (MS-02-195)
- Assembly-by-Torque (AbT) Fittings (MS-02-466)
- Swagelok Medium- and High-Pressure Fittings and Adapters, Alloy Materials (MS-02-474)
- Medium- and High-Pressure Fittings, Tubing, Valves, and Accessories (MS-02-472)
- Dielectric Fittings (MS-02-36)
- Seal Support Data Sheet (MS-02-483)
-
- Accessories
-
- Technical
- CAD Drawings
- An Installer’s Pocket Guide for Swagelok Tube Fittings (MS-13-151)
- Swagelok Tube Fitting Instructions (NL-language)
- Installation Instructions for Female Swagelok Tube Fittings (MS-INS-FS)
- Instructions for Swagelok Medium-Pressure Tube Fittings (MS-CRD-0096)
- Plug Installation Instruction (MS-12-11)
- Installation Instructions for Swagelok Port Connectors (MS-12-12)
- Assembly Instructions Nylon/PTFE Swagelok Tube Fittings to AN Adapter (MS-CRD-NYLONAN)
- Swagelok PFA Tube Fitting Assembly Instructions (MS-12-19)
- Swagelok Dielectric Fittings instructions (MS-CRD-DIELECTRICCARD)
- Coning Tool Operating and Maintenance Instructions (MS-CRD-CONING)
- Caution Card for Adapters Reducers Port Connectors (MS-12-08)
- Fusible Fittings (MS-CRD-0107)
- Swagelok Metric Tube Fitting Card (MS-12-06)
- Tube Fitting Performance Product Test Reports PTRs and Third-Party Product Approvals and Registrations (MS-06-108)
- Instructions for Cone and Thread Fittings (MS-CRD-0224)
- Instructions for 1 inch Medium-Pressure Tube Fittings (MS-CRD-0249)
- Swagelok Tube Fitting Reassembly Instructions for Well Control Equipment Systems (MS-CRD-0275)
- PTR-393 Fire (Burn) Test with Water Quench (Reference API 607) of Stainless Steel Swagelok Tube Fittings
- PTR-1909 Gas Seal and Hydrostatic Pressure Test of Strain-Hardened 316 Stainless Steel NPT End Connections for Swagelok Medium-Pressure Fittings
- PTR-1369 Inboard Helium Leak Test of 316 Stainless Steel Swagelok Tube Fittings at Cryogenic Temperature
- PTR-1388 Outboard Helium Leak Test of 316 Stainless Steel Swagelok Tube Fittings at Cryogenic Temperature
- PTR-3223 Outboard Helium Leak Test of 316 Stainless Steel Swagelok Tube Fittings with Stainless Steel Tubing
- PTR-385 Hydrostatic Pressure Test of Swagelok Tube Fittings on Hard to Extra-Hard Tubing with Tubing Bottomed and Not Bottomed
- PTR-390 Hydrostatic Pressure Test of Swagelok Tube Fittings with 1 Turn and 3/4 Turn of Fitting Nut Assembly on Normal to Extra-Hard Tubing with Tubing Bottomed and Not Bottomed
- PTR-391 Hydrostatic Pressure Test of 316 Stainless Steel Swagelok Tube Fittings on Extra Heavy-Wall Stainless Steel Tubing
- PTR-394 Hydrostatic Pressure Test of 316 Stainless Steel Swagelok Tube Fittings with 1 Turn of Fitting Nut Assembly on Extra Heavy-Wall, Normal to Extra-Hard Tubing
- PTR-3220 Hydrostatic Pressure Test of 316 Stainless Steel Swagelok Tube Fittings with Stainless Steel Heavy-Wall Tubing
- PTR-3224 Inboard Helium Leak Test of 316 Stainless Steel Swagelok Tube Fittings with Stainless Steel Tubing
- PTR-1910 mpulse Testing of Strain-Hardened 316 Stainless Steel NPT End Connections for Swagelok Medium-Pressure Fittings
- PTR-395 Nitrogen Gas Seal Test with Repeated Reassembly of 316 Stainless Steel Swagelok Tube Fittings with Thin-Wall Stainless Steel Tubing
- PTR-3221 Nitrogen Gas Test of 316 Stainless Steel Swagelok Tube Fittings with Stainless Steel Thin-Wall Tubing
- PTR-383 Positive Pressure Helium Leak Test / Nitrogen Gas Seal Test with Repeated Reassembly of 316 Stainless Steel Swagelok Tube Fittings with Heavy-Wall Stainless Steel Tubing
- PTR-392 Steam Cycle and Thermal Shock Test of 316 Stainless Steel Swagelok Tube Fittings with Stainless Steel Tubing
- PTR-976 Summary of Vibration Test Performance Data Using a Shaker Table for 316 Stainless Steel 1/4, 1/2, 3/4, and 1 Inch Swagelok Tube Fittings With 316 Stainless Steel Tubing
- PTR-386 Thermal Cycle Test of 316 Stainless Steel Swagelok® Tube Fittings with Stainless Steel Tubing
- PTR-1235 Evaluation of Swagelok Medium-Pressure Tube Fittings with SAF 2507 Super Duplex Stainless Steel Tubing
- PTR-1967 Positive Pressure Helium Gas Leak Test with Repeated Reassembly of Stainless Steel Swagelok Medium-Pressure Tube Fittings in Excess of Rated Pressure with SAF 2507 Super Duplex Stainless Steel Tubing
- PTR-1209 Hydrostatic Pressure Test of Stainless Steel Swagelok Medium-Pressure Tube Fittings with the Fitting Nut Tightened to 75% of the Required Installation Torque
- PTR-1966 Hydrostatic Pressure Test of Stainless Steel Swagelok Medium-Pressure Tube Fittings with SAF 2507 Super Duplex Stainless Steel Tubing
- PTR-1206 Hydrostatic Pressure Test of Stainless Steel Swagelok Medium-Pressure Tube Fittings
- PTR-1207 Positive Pressure Helium Gas Leak Test with Repeated Reassembly of Stainless Steel Swagelok Medium-Pressure Tube Fittings in Excess of Rated Pressure
- PTR-1210 Hydrostatic Pressure Test of Stainless Steel Swagelok Medium-Pressure Tube Fittings with Tubing Not Bottomed
- PTR-1968 Rotary Flexure Test of 316 Stainless Steel Swagelok Medium-Pressure Tube Fittings with SAF 2507 Super Duplex Stainless Steel Tubing
- PTR-1690 Tensile Pull Test of 6 mm 316 Stainless Steel Swagelok® Medium-Pressure Tube Fittings
- PTR-1689 Thermal Cycle Test of 6 mm 316 Stainless Steel Swagelok® Medium-Pressure Tube Fittings
- PTR-2835 High-Temperature Thermal Cycling and Hydrostatic Proof Test of Super Austen
- PTR-3260 Hydrostatic Pressure Test of Super Austenitic 6Mo (6-moly) Stainless Steel Tubing With 6Mo Stainless Steel (6-moly) Swagelok Tube Fittings
- PTR-2852 Hydrostatic Pressure Test of Super Austenitic 254 SMO® (6-moly) Stainless Steel Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-2849 Hydraulic Impulse Test and Hydrostatic Proof Test of Super Austenitic 254 SMO (6-moly) Stainless Steel Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-2836 Low-Temperature Thermal Cycling and Hydrostatic Proof Test of Super Austenitic 254 SMO (6-moly) Stainless Steel Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-3263 Nitrogen Gas Seal Test with Repeated Reassembly of Super Austenitic 6Mo Stainless Steel (6-moly) Tubing with 6Mo Stainless Steel (6-moly) Swagelok Tube Fittings
- PTR-2853 Nitrogen Gas Seal Test with Repeated Reassembly of Super Austenitic 254 SMO Stainless Steel (6-moly) Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-2841 Rotary Flexure Test of Super Austenitic 254 SMO (6-moly) Stainless Steel Tubing With Stainless Steel Swagelok® Tube Fittings
- PTR-3262 Rotary Flexure Test of Super Austenitic 6Mo (6-moly) Stainless Steel Tubing With 6Mo Stainless Steel (6-moly) Swagelok Tube Fitting
- PTR-3261 Tensile Pull Test of Super Austenitic 6Mo (6-moly) Stainless Steel Tubing With 6Mo Stainless Steel (6-moly) Swagelok Tube Fittings
- PTR-2834 Tensile Pull Test of Super Austenitic 254 SMO (6-moly) Stainless Steel Tubing with Stainless Steel Swagelok® Tube Fittings
- PTR-864 Hydrostatic Pressure Test of Alloy 825 Swagelok Tube Fittings with Alloy 825 Tubing
- PTR-3266 Hydrostatic Pressure Test of Alloy 825 Swagelok Tube Fittings with Alloy 825 Tubing
- PTR-3269 Nitrogen Gas Seal Test with Repeated Reassembly of Alloy 825 Swagelok Tube Fittings with Alloy 825 Tubing
- PTR-865 Nitrogen Gas Seal Test with Repeated Reassembly of Alloy 825 Swagelok Tube Fittings with Alloy 825 Tubing at 1.25 Times the Working Pressure
- PTR-3268 Rotary Flexure Test of Alloy 825 Swagelok Tube Fittings with Alloy 825 Tubing
- PTR-866 Rotary Flexure Test of Alloy 825 Swagelok Tube Fittings with Alloy 825 Tubing
- PTR-3267 Tensile Pull Test of Alloy 825 Swagelok Tube Fittings with Alloy 825 Tubing
- PTR-867 Tensile Pull Test of Alloy 825 Swagelok Tube Fittings with Alloy 825 Tubing
- PTR-1347 Rotary Flexure Test of SAF 2507 Swagelok® Tube Fittings with 6-Moly Back Ferrules with SAF 2507 Tubing
- PTR-1434 Hydrostatic Pressure Test of Alloy 625 Swagelok Tube Fittings with Alloy 625 Tubing
- PTR-1432 Nitrogen Gas Seal Test with Repeated Reassembly of Alloy 625 Swagelok Tube Fittings with Alloy 625 Tubing at 1.25 Times the Tubing Working Pressure
- PTR-1433 Tensile Pull Test of Alloy 625 Swagelok Tube Fittings with Alloy 625 Tubing
- PTR-2089 Thermal Cycle and Thermal Soak Test of 6ELT Stainless Steel Swagelok Tube Fittings with Stainless Steel Tubing
- PTR-3216 Seismic Intensity Analysis of Laboratory Testing of Installed Stainless Steel Swagelok Tube Fittings
- PTR-3562 Nitrogen Gas Seal Test with Repeated Reassembly of Tungum Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-3563 Rotary Flexure Test of Tungum Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-3561 Low-Temperature Thermal Cycling and Hydrostatic Proof Test of Tungum Tubing with Stainless Steel Swagelok® Tube Fittings
- PTR-3558 High-Temperature Thermal Cycling and Hydrostatic Proof Test of Tungum Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-3560 Hydrostatic Pressure Test of Tungum Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-3559 Hydraulic Impulse Test and Hydrostatic Proof Test of Tungum Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-3564 Tensile Pull Test of Tungum Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-3778 Hydrostatic Pressure Test of Alloy 825 Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-3779 Low-Temperature Thermal Cycling and Hydrostatic Proof Test of Alloy 825 Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-3782 Tensile Pull Test of Alloy 825 Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-3781 Rotary Flexure Test of Alloy 825 Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-3776 High-Temperature Thermal Cycling and Hydrostatic Proof Test of Alloy 825 Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-3780 Nitrogen Gas Seal Test with Repeated Reassembly of Alloy 825 Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-4012 Hydraulic Impulse Test and Hydrostatic Proof Test of Stainless Steel Tubing with Stainless Steel Swagelok® Tube Fittings
- PTR-1726 Reassembly and Helium Leak Test of Swagelok® VCR® Metal Gasket Face Seal Fittings with Silver-Plated and Unplated Stainless Steel and Nickel Gaskets
- PTR-1192 Nitrogen Gas Seal Test with Repeated Reassembly of 316 Stainless Steel Swagelok Tube Fittings at 1.25 Times the Working Pressure
- PTR-4060 Tensile Pull Test of 316 Stainless Steel Swagelok® Tube Fittings with Stainless Steel Tubing
- PTR-3090 Hydrostatic Pressure Testing of 6MABT and 4ABT Series Stainless Steel Swagelok Assembly-by-Torque (AbT) Tube Fitting Assembled to Stainless Steel Tubing and Stainless Steel Tube Adapters
- PTR-4132 Rotary Flexure Test of 4ABT, 6ABT, 8ABT, 6MABT, 8MABT, 10MABT, and 12MABT Series Stainless Steel Swagelok Assembly-by-Torque (AbT) Tube Fitting Assembled to Stainless Steel Tubing
- PTR-4131 Hydrostatic Pressure Test of 6ABT, 8ABT, 8MABT, 10MABT, and 12MABT Series Stainless Steel Swagelok Assembly-by-Torque (AbT) Tube Fitting Assembled to Stainless Steel Tubing and Stainless Steel Port Connectors
- PTR-4133 Helium Gas Seal Test with Repeated Reassembly of 4ABT, 6ABT, 8ABT, 6MABT, 8MABT, 10MABT, and 12MABT Series Stainless Steel Swagelok Assembly-by-Torque (AbT) Tube Fitting Assembled to Stainless Steel Tubing with Alternating Torque
- PTR-4184 Chloride Stress Corrosion Cracking (CSCC) Test of 316 Stainless Steel Swagelok Tube Fittings with Stainless Steel Tubing Using 65°C Cyclic Salt Spray with Substitute Ocean Water
- PTR-4183 Chloride Stress Corrosion Cracking (CSCC) Test of 316 Stainless Steel Swagelok Tube Fitting Engineered Combinations Using 65°C Cyclic Salt Spray with Substitute Ocean Water
- PTR-5003 Thermal Cycle Test of 1 1/2 Inch 316 Stainless Steel Swagelok IPT Series Medium-Pressure Cone and Thread Fittings
- PTR-5001 Hydrostatic Pressure Test of 1 1/2 Inch 316 Stainless Steel Swagelok® IPT Series Medium Pressure Cone and Thread Fittings
- PTR-5002 Nitrogen Gas Seal Test with Repeated Reassembly of 1 1/2 Inch 316 Stainless Steel Swagelok IPT Series Medium-Pressure Cone and Thread Fittings
- PTR-5007 Chloride Stress Corrosion Cracking (CSCC) Test of 316 Stainless Steel Swagelok Tube Fittings and Eight Other Brands of 316 Stainless Steel Tube Fittings
- PTR-3777 Hydraulic Impulse Test and Hydrostatic Proof Test of Alloy 825 Tubing with Stainless Steel Swagelok Tube Fittings
- PTR-5008 Chloride Stress Corrosion Cracking (CSCC) Test of 316 Stainless Steel Swagelok FK Medium Pressure Fittings and Another Brand of 316 Stainless Steel Medium-Pressure Fittings while Pressurized to 15 000 psig (103.4 MPa)
- PTR-5015 Positive Pressure Nitrogen Gas Leak Test with Repeated Reassembly of Alloy 2507 Swagelok Medium-Pressure Tube Fittings Assembled with Alloy 2507 Seamless Tubing
- PTR-5014 Rotary Flexure Test of Alloy 2507 Swagelok Medium-Pressure Tube Fittings
- PTR-5013 Hydrostatic Pressure Test of Alloy 2507 Swagelok Medium-Pressure Tube Fittings
- PTR-5017 Rotary Flexure Test of Stainless Steel Swagelok® Medium-Pressure Tube Fittings (FK Series) and Other Brand Medium-Pressure Cone and Thread Fittings (both with and without anti vibration glands)
-
Pipe
-
Vacuum
-
VCR and VCO
- VCR Metal Gasket Face Seal Fittings (MS-01-24)
- VCO O-Ring Face Seal Fittings (MS-01-28)
-
- Technical
- Swagelok VCR Fitting Installation Instructions (MS-CRD-VCR)
- Swagelok VCO Fittings Installation Instructions (MS-CRD-VCO)
- VCR Face Seal Fitting Lock and Tag Device Instructions (MS-12-27)
- VCR Split-Nut Installation Instructions (MS-CRD-0083)
- PTR-3523 Vibration and Thermal Cycle Testing of Swagelok® VCR® Metal Gasket Face Seal Fittings (PRT-3523)
-
Weld
-
Biopharm
-
Jacketed Tube Connector
-
-
Valves
-
Ball
- One-Piece Instrumentation Ball Valves, 40G Series and 40 Series (MS-02-331)
- Ball Valves, General Purpose and Special Application, 60 Series (MS-01-146)
- Fire Series Ball Valves A60T Series (MS-02-47)
- Distribution Block Valves D60 Series (MS-02-02)
- Trunnion Ball Valves, 83 Series and H83 Series (MS-01-166)
- Trunnion Ball Valves, Special Alloy Materials 83 Series (MS-02-357)
- Multipurpose Ball Valves, SK Serie (MS-02-345)
- Swagelok Alternative Fuel Service (AFS) Ball Valves (MS-02-303)
- Medium- and High-Pressure Fittings, Tubing, Valves, and Accessories (MS-02-472)
- Actuated Ball Valve Selection Guide ISO 5211-Compliant Actuator Mounting Bracket Kits (MS-02-136)
- Steam Trap Test Station With Universal Mount (MS-02-221)
- Swagelok Ball Valve Actuation Options (MS-02-343)
- Process Ball Valve Handle Options (MS-01-137)
- Process Ball Valve Vent Options (MS-02-28)
- Electric Actuators 141 and 142 Series (MS-01-35)
- General Service Ball Valves, GB Series (MS-02-484)
- Special Alloy Ball Valves 60 Series (MS-02-439)
-
- Technical
- Cv calculator
- 40 Series Optional Handles (MS-INS-40-OH)
- 40G Ball Valve Packing Adjustment (MS-INS-40G)
- 40 Series Ball Valve Packing Adjustment (MS-INS-40)
- Actuator Mounting Instructions 40G Series, 40 Series, AFS Series, and SK Series Ball Valves (MS-INS-40-ACT)
- Swagelok 40G Series and SK Series Ball Valve Locking Bracket Installation Instructions (MS-CRD-0103)
- Installation Instructions Bar Handle to 40 Series Valve (MS-INS-40BKB)
- 40 Series Nameplate Installation Instructions (MS-INS-NPK)
- Valve Packing Adjustment (MS-CRD-0112)
- Medium-Pressure Ball Valve Panel-Mount Instructions (MS-CRD-0122)
- Medium-Pressure Ball Valve Handle Positioning Instructions (MS-CRD-0121)
- 60 Series Ball Valves Mounting Instructions for 4-bolt 62 and 63 Series and 8-bolt S62 and S63 Series Valves to 140 Series Actuators (MS-INS-62-AO)
- nstructions for Mounting 60 Series Ball Valves to 131/151, 133/153, or 135/155 Pneumatic Actuators (MS-INS-60-AO)
- 60 Series 4-bolt Fastener Replacement Instructions (MS-INS-60-FAST)
- Panel Mount Instructions 4-bolt 60 Series Ball Valves (MS-INS-60PMK)
- Mounting Instructions For 3-Piece Namur Style Mounting Bracket To 2-Way 60 Series Valves (MS-INS-60-NAMUR)
- “60” Series Flange Seal Installation Instructions (MS-INS-60-2)
- “60” Series Extended Oval Handle Assembly Instructions (MS-INS-60TP)
- “60E” Series Ball Valves Components (MS-INS-60E)
- 4Flange Seal Installation Instructions For A60t Fire Serles, S60p Steam Series, And T60m Thermal Series Ball Valves (MS-INS-F60-3)
- A60 Fire / S60 Steam Series Ball Valves Panel Mount Instructions (MS-INS-S60PMK)
- Maintenance Instructions For R60 Series Ball Valves (MS-INS-R60-1)
- Maintenance Instructions For R60 Series Ball Valves (MS-INS-S60INST)
- “83” Series Ball Valve Maintenance Instructions (MS-INS-83)
- Mounting 83 Series Ball Valve to 130/150 Series Pneumatic Actuator (MS-INS-83-ACT)
- Installation Instructions 83 and H83 Series Locking Handle (MS-INS-83-LOCK)
- Electric Actuator Installation Instruction (MS-INS-ELEC-ACT)
- Solenoid Valve Installation Instructions (MS-CRD-0039)
- Integrated Test Valve Assembly Operating and Service Instructions (MS-INS-TVAUM)
- Swagelok AFS Ball Valve Panel Mount Instructions (MS-CRD-AFS-PM)
- Mounting Instructions ISO 5211 Dimensionally Compliant Bracket, Coupling, and Actuator (MS-INS-4080-NAMUR)
- Mounting Instructions ISO 5211 Dimensionally Compliant Bracket, Coupling, and Actuator to 4-Bolt 60 Series Valves (MS-INS-4B60NM)
- Medium-Pressure Ball Valve Mounting Instructions for FKB Series Medium‑Pressure Ball Valves to ISO 5211-Compliant Actuators (MS-CRD-0124)
- Medium-Pressure Ball Valve Installation Instructions for Lock-out Handle to FKB Series Medium‑Pressure Ball Valves (MS-CRD-0123)
- Medium-Pressure Ball Valve End Screw Replacement Instructions (MS-CRD-0201)
- 60 Series Stem Replacement (MS-INS-3AK)
- 60 Series Ball Replacement (MS-INS-3BK)
- Installation Instructions 43 series Latch Lock Handle Lock closed only service for straight or angle pattern valves (MS-INS-43-LLC)
- Installation Instructions 43 series Latch Lock Handle Lock open or closed service for straight or angle pattern valves (MS-INS-43-LL)
- Latch/Lock Handle for 43X and 43GX Series Ball Valves (MS-INS-43-LLX)
- Installation Instructions 43 series Latch Lock Handle (MS-INS-43LL-Z)
- Installation Instructions 44 series Latch Lock Handle (MS-INS-44LL-X.)
- Installation Instructions 45 series Latch Lock Handle Lock open or closed, or lock closed only service for straight, angle, three-way, and four-way pattern valves (MS-IN-45-LL)
- “60” Series Vinyl Sleeve Assembly Instructions (MS-INS-60-4)
- Maintenance Instructions For “60” & “60X” Series Low Dead Space Inserts (MS-INS-60-LD)
- Latch-Lock Handle Assembly Instructions for 4-Bolt, 60 Series Ball Valves (MS-INS-60LLK)
- Assembly Instructions For 8-bolt 60 Series Locking Handles (MS-INS-60-LOCK)
- Maintenance Instructions For “60M” Series Swing-out Ball Valves (MS-INS-60M)
- Welding/Brazing Instructions for 4-Bolt “60” Series Ball Valves (MS-INS-WELD-60)
- Inline Welding Card for “60” Series Ball Valves (MS-INS-F60-4)
- Instructions For No Lube, 4-bolt “60” Series Ball Valves (MS-INS-60NL)
- Panel Pount Instructions for 83 Series Ball Valves (MS-INS-83X-PM)
- “G83” Series Ball Valve Maintenance Instructions (MS-INS-G83)
- “G83” Series Installation, Maintenance, and Safe Operation Instructions(MS-INS-G83P)
- Swagelok Alternative Fuel Service (AFS) Ball Valve Service Instructions (MS-CRD-AFS)
- Warning Directional Valve (MS-INS-60-VENT)
- Chlorine Series Ball Valves (MS-INS-C60-TAG)
- Maintenance Instructions For C60v Chlorine Service Ball Valves (MS-INS-C60V)
- Maintenance Instructions for Fire Series Ball Valves (MS-INS-F60-1)
- Fire Series Ball Valve "A60t" Installation Instructions (MS-INS-F60INST)
- Maintenance Instructions For S60P Steam Series Ball Valve (MS-INS-S60-1)
- Maintenance Instructions for T60M Thermal Series Ball Valves (MS-INS-T60M)
- 60 and 60X Series 4-Bolt Ball Valves Maintenance Instructions (MS-INS-60-1)
- Swagelok SK Series Ball Valve Service Instructions (MS-CRD-0102)
- 141 Series Type DC Electric Ball Valve Actuators (MS-INS-141DC)
- Process Interface Valve Installation and Operation Instructions (MS-CRD-0234)
- 141 Series Type AC Electric Ball Valve Actuators (MS-INS-141ACO)
- 142 Series Type DC Electric Ball Valve Actuators (MS-INS-142DC)
- 142 Series Type ACE Electric Ball Valve Actuators (MS-INS-142ACEO)
- 142 Series Type DC Electric Ball Valve Actuators (MS-INS-142DCO)
- 142 Series Type AC Electric Ball Valve Actuators (MS-INS-142ACO)
- 142 Series Type ACN Electric Ball Valve Actuators (MS-INS-142ACN)
- 141 Series Type ACJ Electric Ball Valve Actuators (MS-INS-141ACJ)
- 141 Series Type DC Electric Ball Valve Actuators (MS-INS-141DCO)
- 141 Series Type ACJ Electric Ball Valve Actuators (MS-INS-141ACJO)
- 141 Series Type DCE Electric Ball Valve Actuators (MS-INS-141DCE)
- 142 Series Type ACE Electric Ball Valve Actuators (MS-INS-142ACE)
- 142 Series Type DCE Electric Ball Valve Actuators (MS-INS-142DCEO)
- 141 Series Type AC Electric Ball Valve Actuators (MS-INS-141AC)
- 141 Series Type DCE Electric Ball Valve Actuators (MS-INS-141DCEO)
- 141 Series Type ACN Electric Ball Valve Actuators (MS-INS-141ACN)
- 141 Series Type ACN Electric Ball Valve Actuators (MS-INS-141ACNO)
- 142 Series Type DCE Electric Ball Valve Actuators (MS-INS-142DCE)
- 141 Series Type AC Electric Ball Valve Actuators (MS-INS-141AC)
- “83DXL” Series Ball Valve Maintenance Instructions (MS-CRD-0266)
- PTR-5022 Hydrostatic Cycle Life Test of Swagelok® 8GB and 16GB Series General Service Ball Valves
- GB Series Ball Valve Packing Adjustment Instructions (MS-CRD-0265)
- GB Series Ball Valve Instructions for Installing Locking Handles (8GB and 16GB) and Panel Mounting (8GB only) (MS-CRD-0267)
- PTR-5024 Low Temperature Thermal Cycle Test of Swagelok® 8GB and 16GB Series General Service Ball Valves
- PTR-5023 High Temperature Thermal Cycle Test of Swagelok® 8GB and 16GB Series General Service Ball Valves
- PTR-5021 Gas Seat Test and Hydrostatic Shell Test of Swagelok® 8GB and 16GB Series General Service Ball Valves
- GB Series Ball Valve Instructions for Mounting A30/A60/A100 Series Pneumatic Actuators (MS-CRD-0268)
- PTR-5028 ASTM B117 Salt Spray Test of Swagelok® 8GB and 16GB Series General Service Ball Valves, Tested by Element Materials Technology
- Mounting Instructions for ASCO® Solenoids to ISO 5211-Compliant Actuators (MS-CRD-0264)
- Mounting Instructions for Pepperl + Fuchs Limit Switches to ISO 5211-Compliant Actuators (MS-CRD-0261)
- Mounting Instructions for Westlock Limit Switch/Position Indicator to ISO 5211-Compliant Actuators (MS-CRD-0262)
- PTR-5025 Actuation Torque Test of Swagelok® 8GB and 16GB General Service Ball Valves
- Handle Switching Instructions - W60 Series (MS-INS-W60-HDL)
- GB and 60 Series Ball Valve Standard Handle Assembly (MS-CRD-0276)
- IPT Series Ball-Seal and Soft-Seal Poppet Check Valve Service Instructions (MS-CRD-0227)
- IPT Series Dual-Seal Ball Check Valve Service Instructions (MS-CRD-0260)
- 141 Series Type ACE Electric Ball Valve Actuators (MS-INS-141ACE)
- 141 Series Type AC Electric Ball Valve Actuators (MS-INS-141ACO)
- Assembly Instructions For 8-bolt 60 Series Locking Handles (MS-INS-60-LOCK)
- PTR-5046 Actuation Cycle Test of Stainless Steel Swagelok 43G Series Ball Valve with Spring Return Handle
- Instructions for Installing Spring Return Handles on 43G Series Straight or Angle Pattern Valves (MS-CRD-0280)
- ATEX Conformant Valves Instructions for Use in a Potentially Explosive Atmosphere (MS-CRD-0120)
-
Bellow Sealed
- Bellows-Sealed Valves, BN Series (MS-01-94)
- High-Pressure, Pneumatically Actuated Bellows-Sealed Valves, HB Series (MS-01-76)
- Bellows-Sealed Valves, B Series (MS-01-22)
- Bellows-Sealed Metering Valves, BM Series (MS-01-23)
- Bellows-Sealed Valve for Switching Service BY Series (MS-02-58)
- Bellows-Sealed Valves, U Series (MS-01-38)
- Bellows-Sealed Valves, H Series (MS-01-36)
- Bellows-Sealed Valves Maintenance Kits (MS-02-66)
-
- Technical
- HB Series Bellows Valve Technical Report (MS-06-04)
- Bellows Subassembly Replacement Instructions (MS-CRD-0001)
- BM series bellows sealed metering valve (MS-CRD-0009)
- Indicator Switch Retrofit Kit (MS-CRD-0033)
- Installation Instructions Complete Bellows Valve Upperworks BN, BK Series (MS-CRD-0053)
- BN Series Bellows Valve Technical Repor (MS-06-12)
- BN Series Pneumatically Actuated Bellows Valve Bellows Subassembly Replacement Instructions (MS-CRD-0046)
- BN Series Pneumatically Actuated Bellows Valve (1 Series) Bellows Subassembly & Stem Tip Subassembly Replacement Instructions (MS-CRD-0027)
- 3 to 5 Series Pneumatic Actuators Replacement Instructions (MS-CRD-0068)
- Installation Instructions Bellows Valve Insert / Adapter Subassembly B and U Series Bellows Valves (MS-CRD-0004)
- Installation Instructions Bellows Subassemblies B and U Series (MS-CRD-0003)
- Service Instructions CBN Series Bellows Cartridge Valve (MS-CRD-0052)
- Replacement Instructions Pneumatic Actuators 4 Series to 6 Series (MS-CRD-0069)
- Installation Instructions for Gaskets and Metal O-rings in Bellows Valves (MS-CRD-0008)
- Replacement Instructions – “BN” Series Manually Actuated Bellows Sealed Valves (MS-CRD-0037)
- HB Series Pneumatically Actuated Valve Normally Closed Model Bellows Subassembly And Gasket Replacement Instructions (MS-CRD-0023)
- Visual Indicator Kit Installation Instructions For Normally Closed BN Series Valves (MS-CRD-0054)
- Assembling a Microswitch to an Actuated B Series Bellows Valve (MS-CRD-0288)
-
Check
- Check Valves C, CA, CH, CP, and CPA Series (MS-01-176)
- Lift Check Valves 50 Series (MS-01-98)
- All-Welded Check Valves CW Series (MS-02-89)
- Ultrahigh-Purity Fluoropolymer O-Ring–Free Poppet Check Valves (MS-02-320)
- Check Valves Special Alloy Materials CH Series (MS-02-440)
- Industrial Excess Flow Valves, XS Series (MS-01-110)
-
- Technical
- Installation Instructions Gaskets for “6C” and “8C” Check Valves (MS-CRD-0024)
- CA and CPA Series Check Valve Cracking Pressure Adjustment (MS-CRD-0047)
- XS Series Excess Flow Valve Technical Report (MS-06-11)
- Service Instructions CH Series Check Valve (MS-CRD-0025)
- CW Series All Welded Check Valve Welding Instructions (MS-CRD-0050)
- XS Series Excess Flow Valve Service Instructions (MS-CRD-0064)
- XS4 Series Flow Valve Spring Kit (MS-CRD-0065)
- C and CA Series Check Valves Springs, O-Rings, and Gaskets Maintenance Instructions (MS-CRD-0005)
-
Diaphragm
- Springless Diaphragm Valves for High Performance, DP Series (MS-01-165)
- High-Flow, Springless Diaphragm Valves, DF Series (MS-02-24)
- Springless Diaphragm Valves (1.125 in.) For Modular Gas Systems, DE Series (MS-02-366)
- Ultrahigh-Purity Valves for Atomic Layer Processing ALD Diaphragm and Bellows (MS-02-301)
- Diaphragm Valves, DL and DS Series (MS-01-73)
- Bellows- and Diaphragm-Sealed Multiport and Elbow Valves and Monoblock Manifolds (MS-02-442)
- Diaphragm Valves LD Series (MS-01-172)
- Ultrahigh-Purity Fluoropolymer Diaphragm Valves DRP Series (MS-02-171)
- Replaceable-Seat, Springless Diaphragm Valves DPX and DFX Replaceable-Seat Diaphragm Valves (MS-02-470)
-
- Technical
- ALD3 Diaphragm Valve Technical Report (MS-06-106)
- ALD6 Diaphragm Valve Technical Report (MS-06-22)
- DF Series Diaphragm Valve Technical Report (MS-06-14)
- DL and DS Series Diaphragm Valve Technical Report (MS-06-05)
- DP Series Diaphragm Valve Technical Report (MS-06-15)
- Swagelok® DRP Series Ultrahigh-Purity Fluoropolymer 3-Way Diaphragm Valve Technical Report Abstracts (MS-06-107)
- Swagelok® DP Series Springless Diaphragm Valve (1.125 in.) Service Instructions (MS-CRD-DPHR)
- DP Series Diaphragm Valve Directional Handle Replacement Instructions (MS-CRD-DPHR)
- ALD Diaphragm Valve with Solenoid Pilot Valve Solenoid Pilot Valve Replacement Instructions (MS-CRD-0117)
- DF Series Diaphragm Valve Service Instructions (MS-CRD-0071)
- DL/DS Series Diaphragm Valve Service Instructions (MS-CRD-0032)
- LD8 Series Diaphragm Valves Service Instructions (MS-CRD-0029)
- LD16 Series Diaphragm Valves Service Instructions (MS-CRD-0032)
- DRPTM Series Diaphragm Valve Diaphragm Replacement Instructions (MS-CRD-0088)
- DP Series Springless Diaphragm Valves (1.125 in.) Technical Report (MS-06-21)
- DE Series Springless Diaphragm Valves (1.125 in.) Technical Report (MS-06-113)
- DP Series Diaphragm Valve Installation and Maintenance Instructions (MS-CRD-0086)
- ALD3 and ALD6 Series Electronic-Actuator Position (PNP Normally Open) Sensor Installation Instructions (MS-CRD-0217)
- Springless Diaphragm Valves (1.125 in.) For High Performance (MS-02-325)
- DP and DF Series Replaceable-Seat Diaphragm Valves—Seat Replacement Instructions (MS-CRD-0223)
- ALD Optical Sensor Installation Instruction (MS-CRD-0252)
- Connecting and Setting the ALD Amplifier (MS-CRD-0251)
- ALD20 Valve Technical Report (MS-06-123)
- Instructions for Setting Electronic-Actuator Position Sensor (PNP Normally Closed) (MS-CRD-0271)
- Instructions for Setting Electronic-Actuator Position Sensor (NPN Normally Closed) (MS-CRD-0272)
- ALD3E Series Electronic-Actuator Position (PNP Normally Open) Sensor Instructions (MS-CRD-0270)
- ALD7 Diaphragm Valve Technical Report (MS-06-125)
-
Manifolds
- Instrument Manifold Systems (MS-02-445)
- Distribution Manifold, J6 Series (MS-02-214)
- Process Interface Valves DBB Valves, Process Interface Valves and Process Monoflanges (MS-02-340)
- Bellows-Sealed 3-Valve Manifolds (MS-02-07)
-
- Technical
- Swagelok® V Series, VL Series, and VB Series Manifolds with Grafoil Packing (MS-CRD-GMANIF)
- Process Interface Valves and Process Monoflanges Valve Assembly Installation Instructions (MS-CRD-0114)
- Seal and Bolt Assembly Insert Card (MS-INS-M3K-1)
- Mounting Instructions for V Series Manifolds, Universal Mounting Bracket (MS-INS-UNV-MB-V)
- Seal and Bolt Assembly Insert Card (MS-INS-V3K-1)
- PTR-3480 Fugitive Emissions and Seat Leakage Performance Type Test of Swagelok VB05 Block and Bleed Process Interface Valves Witnessed by a Third Party
- Low Pressure Header LHP Series (MS-02-480)
- VB04 Series Process Interface Valve Maintenance Instructions (MS-CRD-0241)
- VB04 Series (14 mm Bore) Process Interface Valves Extended Handle Replacement Instructions (MS-CRD-0256)
- VB04 Series Process Interface Valves Locking Handle Replacement Instructions (MS-CRD-0212)
- VB03 Series Process Interface Valve Maintenance Instructions (MS-CRD-0255)
- VB04 Series Process Interface Valve Probe Maintenance Instructions (MS-CRD-0273)
-
Needle and Metering
- Severe-Service Union-Bonnet Needle Valves, N Series and HN Series (MS-01-168)
- Severe-Service Union-Bonnet Needle Valves, Special Alloy Materials (MS-02-365)
- Integral-Bonnet Needle Valves, O, 1, 18, 20, and 26 Series (MS-01-164)
- Toggle Valves, OG, 1G, and 92 Series (MS-01-54)
- Nonrotating-Stem Needle Valves, D Series (MS-01-42)
- Rising Plug Valves, 4P and 5P Series (MS-01-49)
- Metering Valves, S, M, and 31 Series (MS-01-142)
- General Utility Service Needle Valves, GU Series (MS-02-312)
- Instrumentation Blowdown Valves, 6DB Series (MS-02-118)
- Gauge Valves (MS-01-52)
- Compact Gauge Valves For Gauge Isolation and Venting (MS-02-355)
- Forged-Body Needle Valves, 10 000 psig (689 bar) F10 Series (MS-02-215)
-
- Technical
- Repacking Instructions for Integral Bonnet Needle Valves (O, 1, 18, 20, & 26 series) (MS-INS-IB-LL)
- Replacing o-ring Seals for Integral Bonnet (O, 1, 18, 20, & 26 series) Needle Valves (MS-INS-FB-OR)
- Conversion Instructions for integral bonnet needle valves (O, 1, 18, 20, & 26 series) (MS-INS-IB-CONV)
- O-ring Replacement Instructions for the OG, 1G Valve Series (MS-INS-G)
- Installation Instructions for Toggle Valve Handle Positioner (MS-INS-TGP)
- 4P & 5P Series Seat and Stem Tip Replacement instructions (MS-INS-PDMNT)
- Repacking Instructions for the 31 Series Union Bonnet Valves (MS-INS-SB)
- D Series Maintenance Instructions (MS-INS-DK-1)
- General Utility Service Needle Valves GU Series Maintenance Instructions (MS-CRD-GU)
- M Series Metering Valves Stem Guide Ring / Packing Adjustment (MS-CRD-0018)
- Assembly Instructions – Vernier Handle Kit / S, & M Series Metering Valves (MS-CRD-0014)
- Repacking Instructions for N and HN Series Valves (MS-INS-N)
- Swagelok N Series and HN Series Severe-Service Union‑Bonnet Needle Valve Packing Adjustment (MS-CRD-0200)
- S Series Metering Valve Panel Mounting the Adjustable-Torque Handle (MS-CRD-0030)
- Maintenance Instructions For Angle Pattern Sno-Trik Series Valves (MS-INS-SNO)
- PFA Needle Valves Caution (MS-INS-PFA-C)
- Pneumatically Actuated Valves (MS-INS-90-AO)
- IPT Series Manual NV Needle Valve Service Instructions (MS-CRD-0225)
- IPT Series Manual NVT Needle Valve Service Instructions (MS-CRD-0226)
-
Quater Turn Plug
-
Relief
- Bleed Valves and Purge Valves (MS-01-62)
- Bleed Valves, Special Alloy Materials, BV Series (MS-02-356)
- Proportional Relief Valves, R Series (MS-01-141)
- Proportional Safety Relief Valves. PRV Series (MS-02-432)
-
- Technical
- Warning Card, RL3 Series Relieve Valve (MS-CRD-0038)
- R3A Series Externally Adjustable Relief Valves Maintenance Instructions (MS-CRD-0013)
- Warning Card, R3A Series Relieve Valve (MS-CRD-0028)
- Warning Card, R4 Series Relieve Valve (MS-CRD-0049)
- RL3 Series Externally Adjustable Relief Valves Maintenance Instructions (MS-CRD-0036)
- BV Series Bleed Valves, P Series Purge Valves (MS-INS-BVP)
- RL4 Series Low Pressure Relief Valve Adjustment and Seal Replacement Instructions (MS-CRD-0055)
- R4 Series Pressure Relief Valve Adjustment and Seal Replacement Instructions (MS-CRD-0048.pdf)
-
Valve Accessories
- Valve Lockout Accessory (MS-02-18)
- Solenoid Valves For Electropneumatically Actuated Bellows and Diaphragm Valves (MS-02-70)
- Indicator Switches for Pneumatically Actuated Valves (MS-02-494)
-
- Technical
- Valve Lockout Accessories for Swagelok Valves & Manifolds (MS-CRD-0056)
- Bellows and Diaphragm Valves Indicator Switch Installation (MS-CRD-0072)
- Universal Mount Installation and Strainer Element and Gasket Replacement Instructions (MS-INS-UM)
- Mounting Instructions for MAC Solenoids to Pneumatic Actuators (MS-CRD-0263)
- High Temperature Actuator Fitting Instructions (MS-CRD-0304)
-
Valve Technical
-
-
Filters
-
Grab Sample Systems
- Lees alles over onze monstername systemen
- Grab Sampling Systems Application Guide, A Swagelok Application Solutions (MS-02-479)
- GSM Geared Valve Operation and Maintenance Instructions (MS-CRD-0243)
- Swagelok Ammonia Sampler Application Guide (MS-02-491)
- Swagelok Ammonia Sampler Installation, Operation, and Maintenance Manual (MS-13-335)
- Grab Sample Valve (GSV) Assembly Instructions (MS-CRD-0281)
-
Gas Distribution Systems
- Lees alles over onze gasdistributiesystemen
- Gas Distribution Systems Application Guide (MS-02-486)
- Swagelok Point-of-Use (SPU) User Manual (MS-13-338)
- Swagelok Gas Panel (SGP) User Manual (MS-13-337)
- Swagelok Source Inlet (SSI) User Manual (MS-13-339)
- Swagelok Changeover (SCO) User Manual (MS-13-336)
-
Mechanical Seal Support Systems
-
Hoses and Flexible Tubing
- An Installer’s Pocket Guide for Swagelok Hoses (MS-13-332)
- Hose and Flexible Tubing (MS-01-180)
- Ultrahigh-Purity PFA Tubing PFA4 and PFA9D (MS-02-196)
-
- Technical
- PTR-3294 Cleanability Study of Swagelok® PTFE and PFA Crimped Hoses
- Hose Installation (MS-CRD-0116)
- PTR-2136 Hose Insulation Test of Swagelok PTFE Crimped N series Hose
- PTR-2142 Hose Insulation Test of Swagelok PTFE Crimped S series Hose
- PTR-2143 Hose Insulation Test of Swagelok PFA Crimped U series Hose
- PTR-2066 Hose Insulation Test of Swagelok® PTFE Crimped W series (SBI) Hose
- Hose Hand Swager User’s Manual (MS-13-211)
- Hose Animal Derived Ingredient (ADI) Status (MS-CRD-0233)
- PTR-4135 Steam Cycle Test of Swagelok U Series PFA Hose Assemblies
- PTR-4138 Burst Test of 2 in. Swagelok U Series Hose Assemblies
- PTR-4139 Thermal Cycle Test of Swagelok U Series Hose Assemblies
- PTR-4137 Burst Test of Swagelok 1.5 in. U Series Hose Assemblies
- PTR-4188 ISO 10380:2012 Cyclic Lifetime, Dynamic Bend Radius Testing of Swagelok FX Series Metal Flexible Hose Assemblies
- PTR-5016 Burst Testing of Swagelok PB Series Hose Assemblies
- PTR-5019 Burst Testing of Swagelok T Series Hose Assemblies
- PTR-5020 UL94 Vertical Flammability Test of Silicone Boots for Swagelok Insulated Hose Assemblies
-
Leak Detectors, Lubricants, Sealants
-
Measurement Devices
-
Flowmeters & Sensors
-
Gauges
- Pressure Gauges Industrial and Process, PGI Series (MS-02-170)
- Pressure Gauges General Purpose Gauge with ECE R110 Approval, PGN Series (MS-02-363)
- Pressure Gauges Ultrahigh-Purity and Clean Dry Air, PGU and PGC Series (MS-02-163)
- Pressure Gauges For the Sanitary Industries,PSD and PSF Series (MS-03-10)
- Pressure Gauges For Panel Builders, PBG Series (MS-02-333)
- Positionable Pressure Gauges, PPG Series, Models B, P, and S (MS-02-364)
-
- Technical
-
Smart Products
- Digital Valve Control Module VCM Series (MS-02-435)
- Intrinsically Safe Pressure and Temperature Transducers, PTX Series (MS-02-475)
- Intrinsically Safe Intelligent Control Module Commissioner Tool Manual (MS-13-331)
-
- Technical
- Valve Control Module (VCM) User’s Manual (MS-13-221)
- Pressure and Temperature Transducer (PTX) User’s Manual(MS-13-222)
- Intrinsically Safe Pressure and Temperature Transducers (PTX Series) User’s Manual (MS-13-229)
- Valve Control Module (VCM) Instructions (MS-CRD-0129)
- Remote Monitoring System Installation, Operation, and Maintenance Manual (MS-13-347)
-
Temperature
-
Transducers
- Industrial Pressure Transducers Standard Industrial (S Model) (MS-02-225)
- Industrial Pressure Transducers Product Launch Card (MS-05-65)
-
- Technical
- Industrial Pressure Transducers User’s Manual E Model (MS-CRD-PTI-E)
- Industrial Pressure Transducers User’s Manual S Model (MS-CRD-PTI-S)
- Industrial Pressure Transducers User’s Manual T Model (MS-CRD-PTI-T)
- Attachable Indicator Display for Industrial Pressure Transducers User’s Manual (MS-CRD-PTI-AI)
- Remote Panel Mount Display Model PTI-P Operating Instructions (MS-13-PTI-PM)
-
-
Miniature Modular Systems
- Modular Platform Components (MPC) Surface-Mount Components, Substrates, Manifolds, Mounting Components, and Assembly Hardware (MS-02-185)
- Modular Surface-Mount Components and Seals 9MS-02-135)
- Stream Selector System For Process Analyzer Applications, SSV Series (MS-02-326)
- Stream-Select, Switching, and Shutoff Valve Assemblies, TT2 and T2 Series (MS-02-174)
-
- Technical
-
Pre-Engineered Subsystems (PrESS)
- Field Station Module, FSM, Application Guide A Swagelok Pre-Engineered Subsystem (MS-02-359)
- Fluid Distribution Header, FDH, Application Guide A Swagelok Pre-Engineered Subsystem (MS-02-358)
- Calibration and Switching Module, CSM, Application Guide A Swagelok Pre-Engineered Subsystem (MS-02-360)
- Fast Loop Module, FLM, Application Guide A Swagelok Pre-Engineered Subsystem (MS-02-361)
- Sample Probe Module Application Guide A Swagelok Pre-Engineered Subsystem (MS-02-425)
-
Quick-Connects
- Quick Connects, QC, QF, QM, and QTM Series (MS-01-138)
-
- Technical
- Instrumentation Quick-Connects, QC Series (MS-CRD-QC1)
- QC Series Quick-Connects Service Instructions (MS-CRD-QC2)
- Full Flow Quick-Connects, QF Series (MS-CRD-QF1)
- Miniature Quick-Connects, QM Series (MS-CRD-QM1)
- QTM Series Quick-Connects Operation Instructions (MS-CRD-QTMR)
- QTM Series Quick-Connects Release Button Operation Instructions (MS-CRD-QTMB)
- QC Series Quick-Connect Design Change Identification (MS-CRD-QC3)
- QTM Series Quick-Connects Operation Instructions (MS-CRD-QTMR1)
-
Regulators
- Pressure Regulators K Series (MS-02-230)
- Pressure Regulators RHPS Series (MS-02-430)
- KCA Series Continuous Gas Delivery System (MS-18-01)
- High-Flow, Manual Gas Pressure Regulators, HF Series (MS-02-157)
- Compact, High-Flow Gas Regulators, HF Series (MS-01-156)
- Sanitary Pressure Regulators RHPS Series (MS-02-436)
- Tank Blanketing Pressure Regulators RHPS Series (MS-02-431)
- Process Regulators (MS-02-492)
- Regulator flow curve generator
-
- Technical
- High Pressure Regulators User’s Guide (MS-CRD-0191)
- KEV Series Electrically Heated Vaporizing Pressure Reducing Regulators Instructions (MS-CRD-KEV1)
- HF Series Set-Pressure Regulator Technical Report (MS-06-93)
- HF Series Manual Regulator Technical Report (MS-06-98)
- HF Series Manual Regulator Load Spring Installation Instructions (MS-CRD-0087)
- HF Series Welding Instruction (MS-CRD-0085)
- Pressure Regulator Flow Curves Technical Bulletin (MS-06-114)
- Pressure-Reducing Regulators KPR Series Maintenance Instructions (MS-CRD-KPRMAINT)
- KBP Series Regulators Maintenance Instructions (MS-CRD-0108)
- KCB Series Regulators Maintenance Instructions (MS-CRD-0134)
- KCP Series Regulators Maintenance Instructions (MS-CRD-0109)
- KCM Regulator Installation and Operation Instructions (MS-CRD-KCM)
- KEV Series Regulators Maintenance Instructions (MS-CRD-0143)
- KHB Series Regulators Maintenance Instructions (MS-CRD-0135)
- KHF Series Regulators Maintenance Instructions (MS-CRD-0137)
- KHP Series Regulators Maintenance Instructions (MS-CRD-0140)
- KHR Series Regulators Maintenance Instructions (MS-CRD-0141)
- KFB Series Regulators Maintenance Instructions (MS-CRD-0133)
- KLF Series Regulators Maintenance Instructions (MS-CRD-0136)
- KPB Series Regulators Maintenance Instructions (MS-CRD-0132)
- KPF Series Regulators Maintenance Instructions (MS-CRD-0139)
- KPP Series Regulators Maintenance Instructions (MS-CRD-0138)
- KSV Series Regulators Maintenance Instructions (MS-CRD-0144)
- Pressure Regulators User’s Guide (MS-CRD-KREG)
- Pressure-Reducing Regulators Filter Assembly Replacement Instructions (MS-CRD-KFILTER)
- RHPS Series BD(H) 20, 25 (-DP) User Manual (MS-CRD-0151)
- RHPS Series BD(H) 6,8 User Manual (MS-CRD-0152)
- RHPS Series BD(H)10, 15 (-DP) User Manual (MS-CRD-0153)
- RHPS Series BD(H)F40 User Manual (MS-CRD-0154)
- BS(H)2 and BD2 Back-Pressure Regulator User Manual (MS-CRD-0156)
- (LP)BS(H)4/6/8 Back-Pressure Regulator User Manual (MS-CRD-0157)
- BS(H)10/15 Back-Pressure Regulator User Manual (MS-CRD-0158)
- RHPS Series CRS4,6 User Manual (MS-CRD-0160)
- RHPS Series HPRSS4, 8 User Manual (MS-CRD-0162)
- LBS4 Back-Pressure Regulator User Manual (MS-CRD-0163)
- TBRS4 Pressure-Reducing Regulator User Manual (MS-CRD-0164)
- TBRS(H)8 Pressure-Reducing Regulator User Manual (MS-CRD-0165)
- TBRS16 Pressure-Reducing Regulator User Manual(MS-CRD-0166)
- TBVS8 Back-Pressure Regulator User Manual (MS-CRD-0168)
- RHPS Series VBS8 User Manual (MS-CRD-0169)
- RHPS Series LPRD20 - 40 User Manual (MS-CRD-0170)
- LRS(H)4 Pressure-Reducing Regulator User Manual (MS-CRD-0171)
- PRS4 and PRS8 Pressure-Reducing Regulator User Manual (MS-CRD-0172)
- RHPS Series PRS(TC)12 User Manual (MS-CRD-0173)
- PRS15 Pressure-Reducing Regulator User Manual (MS-CRD-0174)
- RHPS Series PRV 2 User Manual (MS-CRD-0175)
- RHPS Series PRV 6 User Manual (MS-CRD-0176)
- RA4/6/8 Pressure-Reducing Ratio Regulator User Manual (MS-CRD-0177)
- RD(H)6/8(DP) Pressure-Reducing Regulator User Manual (MS-CRD-0179)
- RD(H)10/15 Pressure-Reducing Regulator User Manual (MS-CRD-0180)
- RHPS Series LPRD10, 15 -DP User Manual (MS-CRD-0181)
- RD(H)20/25 Pressure-Reducing Regulator User Manual (MS-CRD-0182)
- RD(H)30/40 Pressure-Reducing Regulator User Manual (MS-CRD-0183)
- RHPS Series RD(H)F40 User Manual (MS-CRD-0184)
- RS(H)2 and RD2 Pressure-Reducing Regulator User Manual (MS-CRD-0185)
- (LP)RS(H)4/6/8 Pressure-Reducing Regulator User Manual (MS-CRD-0186)
- LPRS10/15 Pressure-Reducing Regulator User Manual (MS-CRD-0187)
- RS(H)10/15/20 Pressure-Reducing Regulator User Manual (MS-CRD-0188)
- RS(H)20, 25 User Manual (MS-CRD-0189)
- RHPS Series LPRD4,6,8 -DP User Manual (MS-CRD-0192)
- PTR-1269 Oxygen Test of Swagelok KPR Series Pressure Regulators
- KCP Series Regulators Maintenance Instructions (MS-CRD-0109)
- PTR-424Lock-Up and Creep Test of Swagelok HFM Series Pressure Regulators
- KCA Series Continuous Gas Delivery System Installation and Operation Instructions (MS-CRD-0248)
- TBVS4 Back-Pressure Regulator User Manual (MS-CRD-0167)
- KCY Series Regulators Maintenance Instructions (MS-CRD-0239)
- Swagelok Process Regulators Back Pressure Regulators User Manual (MS-CRD-0289)
- Swagelok Process Regulators Pressure Reducing 1/2 in. to 1 1/2 in. User Manual (MS-CRD-0290)
- Ramp Regulator Cartridge Replacement Instructions (MS-CRD-0298)
- Swagelok Process Regulators Pressure Reducing Ramp Regulator User Manual (MS-CRD-0306)
- Swagelok Electronic Pressure Controller Hazardous Locations Safety Manual (MS-CRD-0300)
-
Sample Cylinders
-
Tubing and Accessories
-
Tubing
- Stainless Steel Seamless Tubing, Fractional, Metric, and Imperial Sizes (MS-01-181)
- Stainless Steel Titanium Alloyed Tubing Metric Sizes (MS-01-158)
- Multijacketed Tubing, Single-Jacketed Tubing, and Insulated Tubing (MS-02-188)
- Pre-Insulated Tubing Bundles Electric-Traced and Steam-Traced (MS-02-316)
- Alloy 2507 Seamless Super Duplex Tubing Fractional Sizes (MS-02-151)
- Ultrahigh-Purity (UHP) and High-Purity Stainless Steel Tubing Fractional, Metric, and Imperial Sizes (MS-01-182)
- 6-Moly Seamless Tubing (MS-02-478)
-
- Technical
-
Tools and Accessorie
- Tubing Tools and Accessories (MS-01-179)
- Tube Deburring Tool Instructions (MS-12-29)
- Five-Roll Straightener User Instructions (MS-CRD-0147)
- Tube Facing Tool, TF16, TF24, TF48 (MS-13-214)
- Tube Facing Tool, TF72 (MS-13-215)
- Tube Cutting Tool, TC72 (MS-13-216)
- Manual Coning and Threading Tool (IPT Series) User’s Manual (MS-13-224)
- Gaugeable Preswaging Tool Instruction (MS-CRD-0110)
- High Volume AbT Swaging Unit (HVSU) User’s Manual (MS-13-334)
- Multihead Hydraulic Swaging Unit (MHSU), 16FK Operating Instructions (MS-CRD-0250)
- AbT Manual Preswaging Tool Instructions (MS-CRD-0240)
- Bench Top Tube Bender User’s Manual (MS-13-145)
- Bender Repair Instructions (MS-CRD-BNDRPR)
- Electric Tube Bender User’s Manual (MS-13-138)
- Hand Tube Bender Manual (MS-13-43)
- Support System Mounting Options, Support System Assembly Instructions (MS-12-22)
- Tube Cutter Card (SR-PC-TC)
- Tube Sawing Guide Instruction Card (SR-PC-TSG)
- Plastic Tube Flaring System, FTF 1000 User’s Manual (MS-13-171)
-
Tubing Data
-
-
Welding System
- Swagelok Welding System M200 Power Supply (MS-02-342)
- Automatic ID Purge Control For the Swagelok M200 Power Supply (MS-02-367)
- Orbital Welding System, Micro Weld Heads, Series 4 and Series 8 (MS-02-130)
- Orbital Welding System, Series 5 Weld Head (MS-02-129)
- Orbital Welding System High-Performance Weld Head, Series 8HPH (MS-02-304)
- Orbital Welding System, Series 10 Weld Head (MS-02-131)
- Orbital Welding System, Series 20 Weld Head (MS-02-128)
- Orbital Welding System, Series 40 Weld Head (MS-02-140)
- Tube Cutting Tool TC72 Series (MS-02-427)
- Tube Facing Tools, TF16, TF24, TF48, and TF72 Series (MS-02-426)
- Welding Purge Panel WPP Series (MS-02-362)
-
- Technical
- M200 Power Supply User’s Manual (MS-13-212)
- M200 Calibration Unit User Instructions (MS-CRD-0198)
- M200 Automatic ID Purge Control User Instructions (MS-CRD-0148)
- Micro Series Weld Head User’s Manual (MS-13-207)
- Series 5 Weld Head User’s Manual (MS-13-203)
- Series 8HPH Weld Head User’s Manual (MS-13-170)
- Series 10 Weld Head User’s Manual (MS-13-204)
- Series 20 Weld Head User’s Manual (MS-13-205)
- Series 40 Weld Head User’s Manual (MS-13-206)
- M200 Power Supply Port Cover Installation Instructions (MS-CRD-0113)
- Quick Reference Guide Installation Procedure (MS-INS-PURGE-KIT)
- 40H Series Weld Head Electrode Extension Installation Instructions (MS-CRD-0101)
- WPP Series Welding Purge Panel Installation and Operating Instructions (MS-CRD-0145)
- Series 5, 10, and 20 Weld Head Tube Fixture Block Instructions (MS-CRD-FIXTURE)
- Mixing and Usage Instructions for SWS-FLUX-1 (MS-FLUX-INST)
- M200 TIG Torch User Instructions (MS-CRD-0149)
- Swagelok M200 Power Supply Ethernet Instructions (MS-CRD-0277)
-
References
Veilige productkeuze
De volledige inhoud van de catalogus moet worden doorgenomen om ervoor te zorgen dat de systeemontwerper en de gebruiker een veilige productkeuze maken. Bij het selecteren van producten moet rekening worden gehouden met het totale systeemontwerp om een veilige en storingsvrije werking te garanderen. De systeemontwerper en de gebruiker zijn verantwoordelijk voor de werking, de materiaalcompatibiliteit, de juiste specificaties, de correcte installatie, het gebruik en het onderhoud.
⚠ Waarschuwing:
Gebruik de onderdelen van Swagelok (of andere producten die niet aan industriële ontwerpnormen voldoen) niet in combinatie met die van andere fabrikanten.